Garmin fenix 5 Manuale Proprietario

You can use the auto climb feature to detect elevation changes 

automatically. You can use it during activities such as climbing, 

hiking, running, or biking.

Hold MENU.

Select Settings > Activities & Apps.

Select an activity.
NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Climb > Status > On.

Select an option:
• Select Run Screen to identify which data screen appears 

while running.

• Select Climb Screen to identify which data screen 

appears while climbing.

• Select Invert Colors to reverse the display colors when 

changing modes.

• Select Vertical Speed to set the rate of ascent over time.
• Select Mode Switch to set how quickly the device 

changes modes.

You can set 3D speed and distance to calculate your speed or 

distance using both your elevation change and your horizontal 

movement over ground. You can use it during activities such as 

skiing, climbing, navigating, hiking, running, or biking.

You can turn on the Lap Key setting to record a lap or a rest 

during an activity using LAP. You can turn off the Lap Key 

setting to avoid recording laps due to accidental key presses 

during an activity.

Hold MENU.

Select Settings > Activities & Apps.

Select an activity.

Select the activity settings.

Select Lap Key.
The lap key status changes to On or Off based on the current 

setting.

You can use the auto scroll feature to cycle through all of the 

activity data screens automatically while the timer is running.

Hold MENU.

Select Settings > Activities & Apps.

Select an activity.
NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Scroll.

Select a display speed.

The UltraTrac feature is a GPS setting that records track points 

and sensor data less frequently. Enabling the UltraTrac feature 

increases battery life but decreases the quality of recorded 

activities. You should use the UltraTrac feature for activities that 

demand longer battery life and for which frequent sensor data 

updates are less important.

The timeout settings affect how long your device stays in 

training mode, for example, when you are waiting for a race to 

start. Hold MENU, select Settings > Activities & Apps, select 

an activity, and select the activity settings. Select Power Save 

Timeout to adjust the timeout settings for the activity.

Normal: Sets the device to enter low-power watch mode after 5 

minutes of inactivity.

Extended: Sets the device to enter low-power watch mode after 

25 minutes of inactivity. The extended mode can result in 

shorter battery life between charges.

Hold MENU.

Select Settings > Activities & Apps.

Select an activity.

Select an option:
• To remove an activity from your list of favorites, select 

Remove from Favorites.

• To delete the activity from the apps list, select Remove.

Hold MENU.

Select Settings > Activities & Apps.

Select an activity.

Select Reorder.

Select UP or DOWN to adjust the position of the activity in 

the apps list.

You can customize the appearance of the watch face by 

selecting the layout, colors, and additional data. You can also 

download custom watch faces from the Connect IQ store.

Before you can activate a Connect IQ watch face, you must 

install a watch face from the Connect IQ store (

).

You can customize the watch face information and appearance, 

or activate an installed Connect IQ watch face.

From the watch face, hold MENU.

Select Watch Face.

Select UP or DOWN to preview the watch face options.

Select Add New to scroll through additional pre-loaded watch 

faces.

Select   > Apply to activate a pre-loaded watch face or an 

installed Connect IQ watch face.

If using a pre-loaded watch face, select   > Customize.

Select an option:
• To change the style of the numbers for the analog watch 

face, select Dial.

• To change the style of the hands for the analog watch 

face, select Hands.

• To change the style of the numbers for the digital watch 

face, select Layout

• To change the style of the seconds for the digital watch 

face, select Seconds.

• To change the data that appears on the watch face, select 

Additional Data.

• To add or change an accent color for the watch face, 

select Accent Color.

• To change the background color, select Bkgd. Color.
• To save the changes, select Done.

Customizing Your Device

21