Yamaha YAS-706 Manuale Proprietario
SETTINGS
➤ Configuring 4K video mode
En
51
When playing 4K video, select Mode 1 or Mode 2 according to the video signal format.
* When Mode 1 is selected, use a high-speed HDMI cable that supports bandwidth of
18 Gbps.
1
Turn off the unit.
2
Hold down the CONNECT key and press the
key on the unit.
The selected 4K video mode (Mode 1 or Mode 2) is enabled, and the unit turns on.
The indicator shows that Mode 1 or Mode 2 has been enabled for several seconds
immediately after the unit turns on.
The indicator shows that Mode 1 or Mode 2 has been enabled for several seconds
immediately after the unit turns on.
Configuring 4K video mode
Mode 1*
4K (60 Hz/50 Hz) signals are input and output in 4:4:4, 4:2:2, or 4:2:0
format.
Depending upon the device connected or the HDMI cable used, video may
not be displayed correctly. Should this occur, select Mode 2.
format.
Depending upon the device connected or the HDMI cable used, video may
not be displayed correctly. Should this occur, select Mode 2.
Mode 2
(default)
(default)
4K (60 Hz/50 Hz) signals are input and output in 4:2:0 format.
CONNECT
Off (Mode 1), glows (Mode 2)