Yamaha YSP-5600 Digital Sound Projector Manuale Proprietario

APPENDIX

➤ Troubleshooting

En

The AC power supply cable of the subwoofer is not firmly connected to the 
AC wall outlet.

Connect the AC power supply cable firmly to the AC wall outlet.

–

The volume of the subwoofer is low.

Increase the volume via the control on the subwoofer.

–

The subwoofer is turned off.

Turn on the subwoofer.

–

The subwoofer's Auto Standby function (the function that automatically 
turns it off) was activated.

Deactivate the subwoofer's Auto Standby function or adjust its operating 
sensitivity.

–

The “Bass Out” item under “Subwoofer” is set to “Front/Wireless”.

Set it to “Wired”.

Conditions for wireless communications are not good, and the unit and the 
wireless subwoofer kit are not connected. 
(The indicator on the wireless subwoofer kit flashes green, or glows red.)

Move the wireless subwoofer kit closer to the unit. 
If the problem persists, move the wireless subwoofer kit to a location where 
its indicator steadily glows green.

–

If there are obstacles such as metal furniture obstructing communications 
between the unit and the wireless subwoofer kit, rearrange the furniture or 
reposition the wireless subwoofer kit.

–

If there are devices such as microwave ovens or wireless network devices 
that emit electromagnetic waves, move the unit and the wireless subwoofer 
kit away from these devices. 

–

Unplug the power cable of the wireless subwoofer kit from the AC wall 
outlet, and then plug it in again.

–

The unit is not paired with the wireless subwoofer kit. 
(The indicator on the wireless subwoofer kit flashes red.)

Move the wireless subwoofer kit closer to the unit to improve conditions for 
wireless communications, and follow the instructions below to pair the two.
After “Pairing” is selected for “Subwoofer” in the setup menu, press and 
hold the SUBWOOFER PAIRING button on the wireless subwoofer kit for 
three seconds to pair it with the unit. If the indicator on the wireless 
subwoofer kit does not glow green steadily after pairing, the unit may be 
malfunctioning. Disconnect the power cable and contact your nearest 
Yamaha dealer or service center to request repairs.

The subwoofer output is set to “Wired”.

Set to “Front/Wireless”.

The volume of the subwoofer is low. 

Increase the volume via the control on the subwoofer.

–

Increase the volume of the subwoofer with the SUB + key.

Content from an input source with a limited support for low tones is playing.  Play content from an input source with broader support for low tones to see 

if volume is still low.

–

The unit is in target playback mode.

Switch to 3D surround/surround playback mode or stereo playback mode.

37, 38, 40