TP-LINK Archer C1200 Manuale Proprietario

87

Chapter 14

 

Manage the Router 

6. Wait a few minutes for the upgrade and reboot to complete. 

14. 4. 3.  Restore Interrupted Upgrade After Power Failure

If your router cannot start up after an upgrade interruption due to power failure, follow 
the steps below to restore the interrupted upgrade. Otherwise, your router cannot work 
again.
1. Make sure you have the latest firmware file in your computer. If not, try another way 

to connect your computer to the Internet and download the latest firmware file from 

www.tp-link.com

. 

2. Connect your computer to the router with an Ethernet cable.
3. Visit 

192.168.0.1

 and you will see the following upgrade page. 

4. Click 

Browse

 and select the downloaded firmware file. 

5. Click 

Upgrade

 and wait for a few minutes until the router completes the upgrading 

and restarts. 

14. 5.  Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can 
backup the configuration file to your computer for future use and restore the router to 
a previous settings from the backup file when needed. Moreover, if necessary you can 
erase the current settings and reset the router to the default factory settings. 
1. Visit 

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for 

the router.

2. Go to 

Advanced

 > 

System Tools

 > 

Backup & Restore

.

¾

Click 

Backup

 to save a copy of the current settings to your local computer. A ‘.bin’ file of 

the current settings will be stored to your computer.