Sennheiser HD 1 On-ear Wireless Manuale Proprietario
M2 OEBT
| 11
Getting started
Getting started
Charging basics
A complete charging cycle takes about 3 hours. Before using the headphones for
the first time, charge their rechargeable battery for a complete charging cycle
without interruption.
the first time, charge their rechargeable battery for a complete charging cycle
without interruption.
When the battery is almost empty or when the headphones are being charged,
the LED lights up or flashes as indicated in the table below and a voice prompt
announces the charge condition of the battery. When the battery charge drops
to a low level, a voice message prompts you to recharge the headphones to
avoid call and music disruptions.
the LED lights up or flashes as indicated in the table below and a voice prompt
announces the charge condition of the battery. When the battery charge drops
to a low level, a voice message prompts you to recharge the headphones to
avoid call and music disruptions.
It is recommended to charge the headphones using only the supplied USB cable
and a USB power adapter with a rated output of 500 mA or higher.
and a USB power adapter with a rated output of 500 mA or higher.
LED
Meaning
Voice prompt
Battery is almost empty
(less than 2 % charged)
(less than 2 % charged)
“Recharge headset“
“Power off”
Battery is less than 15 % charged
“Below 3 hours play
time”
Battery is less than 25 % charged
“Between 3 and
5 hours play time”
Battery is less than 50 % charged
“Between 5 and
11 hours play time”
Battery is less than 80 % charged
“Between 11 and
18 hours play time“
Battery is more than 80 %
charged
charged
“Between 18 and
22 hours play time“
5m
Battery is fully charged
“Between 18 and
22 hours play time”
3h