Sennheiser HD 1 On-ear Wireless Manuale Proprietario
24 |
M2 OEBT
Using the headphones
Using the audio cable
There are 2 connection modes when you use the audio cable:
X
Active mode - the audio cable is used and the headphones are switched on.
X
Passive mode - the audio cable is used and the headphones are switched off.
Regardless of the connection mode,
Bluetooth and the call and music control
functions are disabled if the audio cable is used. Use the audio cable only when:
– the headphones’ battery pack is empty
– wireless transmission is not allowed, e. g. during aircraft take-off and
landing
Connecting using the audio cable
1.
1.
Plug the 2.5 mm jack plug into the audio input of the headphones until you
hear a click sound. Turn the jack plug counterclockwise and ensure that it is
securely locked in place.
The
hear a click sound. Turn the jack plug counterclockwise and ensure that it is
securely locked in place.
The
Bluetooth connection is disabled.
2.
Connect the 3.5 mm jack plug to:
– the audio output of your smartphone
– the in-flight adapter if you want to use the headphones with an in-flight
entertainment system
In
active mode, the NoiseGard active noise cancellation feature is enabled; in
passive mode, the active noise cancellation feature is disabled.
2
1
1
Click
2
1
2
MOMENTU
M