Dbx dbx® 234xs Manuale Proprietario

223s, 223xs,
234s, 234xs

 Section 3 - Rear Panel Operations

The mode switches on the back panel of the unit are used to select one of the three modes 
of operation in the 234s/234xs and one of two modes of operation in the 223s/223xs. There 
could be disastrous consequences if the crossover were improperly setup or the switches were 
mistakenly pushed during the regular operation of a sound system. Therefore great care should 
be taken when setting these switches. There is a mode diagram on the back panel to help you 
understand at a glance how this is done. The following steps should be taken in setting up 
your system:
 

of your particular speaker system. Follow the manufacturer’s guidelines carefully, as 
dbx is not responsible for damage relating to improper setup or implementation of the 
234s/234xs or the 223s/223xs.

 

crossover to set it to the proper mode of operation; either stereo 2-way, stereo 3-way, or 
mono 4-way for the  234s/234xs, or stereo 2-way or mono 3-way for the 223s/223xs.

 

operation and crossover frequencies to the manufacturer’s specifications.

marked “not valid”. Be sure you have not selected this combination as the 234s/234xs 
will not operate correctly in this mode.

When you are certain that the proper selections have been made, complete the steps 

described below and in the “234s/234xs or 223s/223xs Audio Connections” section on page 9.

Section 3

Rear Panel Operations