Dbx dbx® 234xs Manuale Proprietario

223s, 223xs,
234s, 234xs

Note:
There  are  no  front  panel  differences  between  the  234s  and  the  234xs.    Therefore  the                  
234xs is shown below, representing both the 234s and the 234xs.

STEREO 2-WAY MODE
In 2-way stereo mode the controls are marked in black BELOW the horizontal black line.
Channel One and Channel Two functions are identical in the stereo mode. Front panel controls 
not described in this section are not active in stereo 2-way operation.

[1] & [5]  

 

 

Controls the INPUT level with +/- 12 dB of gain.

[2] & [6] 

* 

 

Selects crossover point between the LOW and  

     HIGH 

outputs. 

[3] & [7] 

 

  

Controls the Low frequency output level with a  

 range 

of 

’to +6 dB.

[4] & [8] 

  

 

 Controls the High frequency output with a range 
of 

’to +6 dB.

[9] & [14] 

   

  

 Switch for selecting the 40 Hz high pass filter. An 
LED indicates the selection.

[10] & [15] 

10 LED  

  

 Indicates that the LOW/HIGH crossover frequency 
range is 450 Hz to 9.6 kHz.

[11] & [16] 

 

 

 Switch for reversing the polarity on the LOW 
Output. An LED indicates that the phase is 
inverted.

[12] & [17] 

 

 

 Switch for reversing the polarity on the HIGH 
Output. An LED indicates that the phase is 
inverted.

[13] 

 

   

 

LED indicating stereo mode operation.

*although this control is labeled as “

”, it operates as the crossover frequency control 

between low and high frequencies in stereo 2-way operation.

Section 2

Operating Controls

  Section 2 - Operating Controls