Rockford Fosgate PMX-2 Manuale Proprietario

7

To access the source unit’s settings, long press the MENU button until the 
options appear. Rotate the encoder to scroll through the list of settings and 
short press the encoder button to select the setting you wish to change. 
(BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT PAIRING>BEEP>TUNER 
REGION>SOFTWARE>FACTORY DEFAULT)

This source unit has a zero current draw when turned off. All of your settings and 
presets will be saved along with your boat’s battery during storage.

Short press the encoder button to access BALANCE adjustment settings. Rotate 
the encoder button to set output BALANCE.

Short press the encoder button to access FADER adjustment settings. Rotate the 
encoder button to set output FADER.

To access the AUDIO settings, short press the AUDIO option from the MENU 
screen. Rotate the encoder to scroll through the list of settings and short 
press the encoder button to select the setting you wish to change. (7 BAND 
EQ>CROSSOVER>PEQ>REAR RCA>AUX INPUT>SOURCE GAIN>INTERNAL 
AMPLIFIER)

Short press the encoder button to access the 7 BAND EQ settings. Use the 
rotary encoder to scroll through the EQ settings. (FLAT > ROCK > CLASSIC > 
ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP > CUSTOM) When setting 
up the CUSTOM EQ, short press the encoder button to set the first frequency. 
Once active, rotate the encoder to adjust the frequency settings. Short press 
encoder button again to access the next frequency. Repeat until all EQ settings are 
complete. Short press the MENU button to exit and go back up one level.

Short press to access the CROSSOVER settings. Use the rotary encoder to select 
the crossover zone options (FRONT>REAR>SUB). Short press the encoder to 
adjust the frequency of the crossover (60Hz>80Hz>120Hz>APF). Short press 
MENU to exit and go back up one level.

Short press to access the REAR RCA options. Use the rotary encoder to select 
options (LINE OUT>SUBWOOFER).

Short press to access the PUNCH EQ settings. Use the rotary encoder to adjust 
the gain output (0-12). Short press MENU to exit and go back up one level.

Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB 
boost at 12.5kHz

RENAME – To rename AUX, short press the encoder button to set the first letter 
of the new name. Once active, rotate encoder to adjust letters. Short press the 
encoder button again to set the next letter. Repeat until AUX has been renamed. 
Short press MENU to exit and go back up one level.

ENABLE - Short press the encoder button to access options. Rotate the encoder 
button to select if unit is discoverable. (ENABLE > DISABLE)

To adjust the level of device input gain, scroll through the inputs (FM TUNER>AM 
TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA) to the device you want 
to adjust, short press the encoder button to access the gain settings. Rotate the 
encoder button to set the level of gain. (-3dB > -2dB > -1dB > 0dB > +1dB > +2dB 
> +3dB) 

Short press to access the INTERNAL AMPLIFIER options. Use the rotary encoder 
to select options (ON>OFF). When using an amplifier to power your speakers, 
select OFF. If you are powering your speakers directly from the source unit, select 
the INTERNAL AMPLIFIER to ON.

To display the vehicle voltage, short press the encoder button on the VOLTAGE 
GAUGE option. 

Short press the encoder button to access options. Rotate the encoder button to 
select if unit is discoverable for pairing. (ENABLE > DISABLE) Once enabled, the 
source unit is now discoverable and ready for pairing to your device. Open the 
Bluetooth settings on your device to find the source unit labeled “Rockford PMX” 
and select.

Short press the encoder button to access the BEEP options. Rotate the encoder 
button to turn system beep ON/ OFF.

To adjust, short press the encoder button to access. Rotate the encoder button to 
select the TUNER REGION of your preference. (EUROPE > USA > RUSSIA > LATIN 
> ASIA > JAPAN > MIDEAST > AUSTRALIA)

VERSION - Short press the encoder button to display the current firmware version 
of the unit.

UPDATE - Short press the encoder button to update the firmware. Follow the 
instructions on the screen when updating.

AUDIO – Short press the encoder button to access. Rotate the encoder button to 
select YES/NO. Selecting YES will reset your unit back to factory default settings.

SYSTEM - Short press the encoder button to access. Rotate the encoder button to 
select YES/NO. Selecting YES will reset your unit back to factory default settings.

Long press the SRC (Power) button to turn the unit ON or OFF

Rotate encoder knob left or right to desired volume level (0-40). The current 
volume level will be displayed during adjustment.