Garmin Striker 7sv Manuale Proprietario

See the Important Safety and Product Information guide in the 

product box for product warnings and other important 

information.

À

Returns to the previous screen.
Returns to the home screen when held.

Á

 

  

Scrolls, highlights options, and moves the cursor.
Zooms in and out of a view. (Available only on the 4 in. 
models.)

Â

Closes a menu, when applicable.
Opens a menu of options for the page, when applicable.

Ã

Turns on and off the device when held.
Performs one or more of these actions when quickly press 
and release:
• adjust the backlight
• adjust the color mode
• enable and disable sonar

Ä

Acknowledges messages and selects options.

Å

Saves the present location as a waypoint.

Æ

Zooms out of a view. (Available only on the 5 in. and 7 in. 
models.)
Zooms in to a view. (Available only on the 5 in. and 7 in. 
models.)

• Go to 

information.

• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.

If you are connecting a transducer that was not included with the 

chartplotter, you may need to set the transducer type to make 

the sonar function properly. If the device automatically detected 

your transducer, this option does not appear.
This chartplotter is compatible with the Garmin ClearVü

™

transducer as well as a range of accessory transducers 

including Garmin GT transducers, which are available at 

.

Select Settings > My Vessel > Transducer Type.

Select the type of transducer you are using.

You can zoom in and out of the Waypoint Map.
• Select   to zoom in.
• Select   to zoom out.

You can move the Waypoint Map to view an area other than 

your present location.

Select   or   to start panning.

Use the arrow keys to pan.

TIP: You can select 

 to zoom.

Select Settings > System > Display > Backlight.
TIP: Press   from any screen to open the backlight settings.

Adjust the backlight.

Select Settings > System > Display > Color Mode.
TIP: Press   from any screen to access the color settings.

Select an option.

You can set when the device makes sounds.

Select Settings > System > Beeper.

Select an option:
• To have the device beep when you select an item and 

when an alarm is triggered, select On (Selections and 

Alarms).

• To have the device beep only when alarms are triggered, 

select Alarms Only.

When you turn on the fishfinder, the GPS receiver must collect 

satellite data and establish the current location. When the 

fishfinder acquires satellite signals, 

 appears at the top of the 

Home screen. When the fishfinder loses satellite signals, 

disappears and a flashing question mark appears over   on the 

screen.
For more information about GPS, go to 

.

The fishfinder home screen provides access to all of the 

features in the fishfinder. The features are dependant on the 

accessories you have connected to the fishfinder. You may not 

have all of the options and features discussed in this manual.
When viewing another screen, you can return to the home 

screen by holding 

. You can customize the layout of the 

screens.

You can add items to and rearrange items on the Home screen.

From the Home screen, select Customize Home.

Select an option:
• To rearrange an item, select Rearrange, select the item to 

move, and select the new location.

• To add an item to the Home screen, select Add, and 

select the new item.

• To remove an item you have added to the Home screen, 

select Remove, and select the item.

You can create a custom screen to suit your needs, which is 

added to your home screen.

Select Customize Home > Add > Add New Layout.

Introduction

1