Nikon COOLPIX A900 Manuale Proprietario

Troubleshooting

If the camera fails to function as expected, check the list of common problems below 
before consulting your retailer or Nikon-authorized service representative. 

Problem

Cause/Solution

A

The camera is 
on but does not 
respond.

• Wait for recording to end.

–

• If the problem persists, turn the camera off.

If the camera does not turn off, remove and reinsert the 
battery or batteries or, if you are using an AC adapter, 
disconnect and reconnect the AC adapter.
Note that although any data currently being recorded will 
be lost, data that have already been recorded will not be 
affected by removing or disconnecting the power source.

The camera 
cannot be 
turned on.

• The battery is exhausted.

10, 11, 
160

• The power switch is enabled a few seconds after the 

battery is inserted. Wait a few seconds before pressing 
the power switch.

–

The camera 
turns off 
without 
warning.

• The camera automatically turns off to save power (auto 

off function).

• The camera and battery may not work properly at low 

temperatures.

• The inside of the camera has become hot. Leave the 

camera off until the inside of the camera has cooled, and 
then try turning it on again.

–

The monitor is 
blank.

• The camera is off.

• The battery is exhausted.

• The camera automatically turns off to save power (auto 

off function).

• The flash lamp flashes while the flash is charging.

Wait until charging is complete.

• The camera is connected to a TV or computer.

–

• Time-lapse movie shooting is in progress.

–

• The camera and smart device are connected using Wi-Fi 

connection and the camera is operated by remote 
control.

–