Canon PowerShot SX60 HS Manuale Proprietario

87

Just as with regular exposure compensation (

flash exposure from –2 to +2 stops, in 1/3-stop increments.

 

●

Raise the flash, press the [ ] button and 
immediately turn the [

] dial to choose 

the compensation level, and then press 
the [

] button.

 

●

The correction level you specified is now 
displayed.

 

●

When there is a risk of overexposure, the camera automatically 
adjusts the shutter speed or aperture value during the flash shots 
to reduce washed-out highlights and shoot at optimal exposure. 
However, you can deactivate automatic adjustment of the shutter 
speed and aperture value by accessing MENU (

choosing [

] tab ► [Flash Control] ► [Safety FE] ► [Off].

 

●

You can also configure the flash exposure compensation by 
accessing MENU (

] tab ► [Flash 

Control] ► [Flash Exp. Comp].

 

●

You can also access the [Built-in Flash Settings] MENU screen 
(

mounted).

 

-

When the flash is up, press the [ ] button and immediately 
press the [

] button.

Fires to illuminate the main subject (such as people) while shooting at a 

slower shutter speed to illuminate backgrounds out of flash range.

 

●

In [

] mode, mount the camera on a tripod or take other 

measures to keep it still and prevent camera shake. Additionally, 
you should set [IS Mode] to [Off] when using a tripod or other 
means to secure the camera (

 

●

In [

] mode, even after the flash fires, ensure that the main 

subject does not move until the shutter sound is finished playing.

For shooting without the flash.

 

●

If a blinking [

] icon is displayed when you press the shutter 

button halfway in camera-shake inducing, low-light conditions, 
mount the camera on a tripod or take other measures to keep it 
still.