Nikon D3400 Kit Manuale Proprietario
142 Recording and Viewing Movies
• Wind noise reduction: Select On to enable the low-cut filter
for the built-in microphone, reducing noise produced by wind
blowing over the microphone (note that other sounds may
also be affected).
blowing over the microphone (note that other sounds may
also be affected).
• Manual movie settings: Choose On to allow manual
adjustments to shutter speed and ISO sensitivity when the
camera is in mode M. Shutter speed can be set to values as
fast as
camera is in mode M. Shutter speed can be set to values as
fast as
1
/
4000
s; the slowest speed available varies with the frame
rate:
1
/
30
s for frame rates of 24p, 25p, and 30p,
1
/
50
s for 50p, and
1
/
60
s for 60p. If shutter speed is not in this range when live
view starts, it will automatically be set to a supported value,
and remain at this value when live view ends. Note that ISO
sensitivity is fixed at the value selected; the camera does not
adjust ISO sensitivity automatically when On is selected for
ISO sensitivity settings > Auto ISO sensitivity control in
the shooting menu (
and remain at this value when live view ends. Note that ISO
sensitivity is fixed at the value selected; the camera does not
adjust ISO sensitivity automatically when On is selected for
ISO sensitivity settings > Auto ISO sensitivity control in
the shooting menu (
1
Select Movie settings.
Press the
Press the
G button to display the
menus. Highlight Movie settings in
the shooting menu and press
the shooting menu and press
2.
2
Choose movie options.
Highlight the desired item and press
2, then highlight an option and press
J.
Highlight the desired item and press
2, then highlight an option and press
J.
A
HDMI
When the camera is attached to an HDMI video device, the video
device will display the view through the lens. If the device supports
HDMI-CEC, select Off for the HDMI > Device control option in the
setup menu (
device will display the view through the lens. If the device supports
HDMI-CEC, select Off for the HDMI > Device control option in the
setup menu (
0 185) before shooting in live view.