Nikon SB-700 AF Speedlight Manuale Proprietario
Operation
B
B–7
Basic Operations
This section covers basic procedures in i-TTL mode in combination with
a CLS-compatible camera.
a CLS-compatible camera.
v
Notes on continuous ash photography
To prevent the SB-700 from overheating, allow it to cool down for at
•
least 10 minutes after 15 times of continuous firing.
When continuous flash firing is repeated in quick succession,
When continuous flash firing is repeated in quick succession,
•
the internal safety function adjusts the recycling time by up to
15 seconds. If flash firing continues, the thermal cut-out indicator
appears on the LCD and all operations are suspended. (
15 seconds. If flash firing continues, the thermal cut-out indicator
appears on the LCD and all operations are suspended. (
0E-31) Allow
it to cool down for several minutes to disable this function.
The conditions under which the internal safety function is activated
The conditions under which the internal safety function is activated
•
differ depending on the temperature and the SB-700 flash output
level.
level.