Marantz PM-14S1 Manuale Proprietario

ENGLISH

Connecting P.DIRECT IN connectors

If you use a pre-ampliﬁer, connect it as shown below, and then you can use this unit as a power
ampliﬁer.

Press and hold P.DIRECT IN on the unit for 3 seconds or longer.

šThe power amp direct mode setting changes with each press of the button.
šIf the mode is set to on, the display shows “POWER AMP DIRECT”.

On : Allows the device connected to the Power Amp Direct connector to be played.
Off (Default): Allows the program source selected using INPUT SELECTOR to be played.

(R)

(L)

Pre-ampliﬁer

Speakers

To PRE OUT connectors

NOTE

šWhen the power amp direct mode is on, adjustment of the volume, balance and tone on the

main unit has no effect. Adjust the volume on the pre-ampliﬁer.

šWhen the power amp direct mode is on, the main unit outputs at maximum volume. Check

the output level on the input device before playing it and adjust the volume accordingly.

Connecting PRE OUT connectors

If you use a power ampliﬁer, connect it as shown below, and then you can use this unit as a
pre-ampliﬁer.
šFor connecting speaker systems, refer to the owner’s manual supplied with the power

ampliﬁer to be used.

Power-ampliﬁer

To input connectors

NOTE

The power amp direct mode and the PRE OUT function cannot work at the same time.