Polk Audio Omni SB1 Plus Manuale Proprietario

1. 

www.polkaudio.com   

 

 

 

 

       

 

 

 

 

 

                   4

1.   Power Connection—The bar power cable connects here. 

2.    Audio Inputs (Source 1 Optical, 2 AUX/Bluetooth, or 3 

Wi-Fi)— Where you connect your TV (or other sources) to 
the sound bar. Source 3 (Wi-Fi) is a wireless connection. For 
“wired” connections, use the 6’ optical cable (Source 1) pro-
vided or 1/8” analog cable (also used by Bluetooth adapter) 
(Source 2) provided. Use the USB charging port for any USB 
powered device (ex. Bluetooth adapter,  
smartphone, tablet, iPod, etc.), for manual firmware updates 
via a USB flash drive, or to create a hard-wired Ethernet 
connection using a USB Ethernet adapter.

3.   IR Input— Use for a wired IR pass-through  

(cable sold separately)

4.  Sub Out— Hard wire sub connection

5.    SYNC—The SYNC button ensures the subwoofer and bar 

are communicating with each other. 

1.  Power Switch—Turns the wireless subwoofer on or off,  

but you can leave it on all the time if you wish.

2.  Power Connection—The subwoofer power cord  

connects here.

a.  Green Steady—The bar and subwoofer are connected.

b.    Green Slow Blinking—The subwoofer is searching 

for the bar.

c.   Green Fast Blinking—The subwoofer is in the process of 

connecting with the bar.

a.  Red Steady—The subwoofer is in standby mode.

b.  Red Blinking—The subwoofer is in protection mode.

Power— Turns on the bar or puts it in  

standby mode.

 Mute— Mutes and unmutes the sound  

coming from the sound bar.

 Source 1, 2, WiFI — Changes which  

input source you are listening to.

Master Volume Up and Down ( + / – )  

Adjusts the master volume of the system.

 Center Volume Up and Down ( + / – )  

Adjusts the volume of the center channel.

 SUB Volume Up and Down ( + / – )  

Adjusts the volume of the subwoofer.

 Movie/Music Select—Tailors the audio  
for either movies or music. 

Your SB1 Plus Sound Bar Sound bar has a dedicated center 
channel, which you control from either the bar or the remote 
control. By controlling the volume of the center channel, you can 
make movie or television dialogue louder and more intelligible. 

The SB1 Plus comes with built-in wireless rear surround  
speaker technology. Just connect the sound bar to any pair of  
Play-Fi speakers and enjoy a true 5.1 home theater experience. 
(App and firmware update required). 

Bluetooth Adapter

The SB1 Plus comes with a separate Bluetooth adapter (must 
be plugged into both USB and Aux IN ports) so you can switch 
between Wi-Fi and Bluetooth in seconds—play audio from even 
more online sources from your phone, tablet or computer without 
having to use the Polk Omni app and restream it to any Play-Fi 
speaker on your network. 

 

Note: For your sound bar to respond to your remote control, you 
MUST FIRST program the bar to respond to your television’s  
original IR (Infra-Red) remote. An RF (Radio Frequency) remote 
will not work. Other remotes (cable, satellite) will work only after 
you have programmed the bar to respond to the TV’s IR remote.

Your sound bar is currently programmed to respond to the remote 
control that is included with the product. However, we strongly  
recommend programming the sound bar to also respond to your  
existing remote control using the steps illustrated below. This will 
enable you to operate all of your components using a single re-
mote control. While programming the sound bar, ignore anything 
that may be displayed on the TV screen.

Example: To teach your bar the “Volume Up” command of your  
remote control.

1.   The Sound Bar is turned on and the LED is dim red, and  

you have sound coming from the bar.

2.     Press and hold the “SOURCE/LEARN” button (on either  

the bar or the included remote) for 5 seconds. LEDs 3, 5,  
7, 9, 11 pulse.