MartinLogan Cadence Manuale Proprietario

9

ON-WALL INSTALLATION
The soundbar can be mounted above or below a 
television with the feedback display and rear connec-
tion panels orientated towards the bottom or top of 
the soundbar (depending on your specific installation 
requirements). The information shown on the sound-
bar display can be flipped to match your installation 
orientation.

Note: These instructions assume the mounting 
surface is standard wood frame and sheetrock 
construction. If you wish to mount to another type 
of surface, consult a bonded contractor.

Note: When installing the system in this configu-
ration, use the soundbar’s menu system to choose 
‘Installation > Wall Mount’.

Required tools (not included):
• Stud 

finder

• Level
•  Electric drill and drill bits
• Phillips 

screwdriver

Required hardware (included):
•  (1) Installation template
•  (1) Wall bracket

Required hardware (not included):
•  (5) Screws appropriate for mounting surface
• (5) 

Sheet rock anchors (sized for screws)

1  Locate mounting location using a level and the 

installation template (fig. 1). 

2  Mark the three central pilot hole locations and 

remove the installation template (fig. 1).

WARNING! We strongly recom-
mend locating the wall bracket so 
at least one of the screw locations 
attaches to a stud. WARNING! 
To prevent injury, this apparatus must be secure-
ly attached to the floor/wall in accordance 
with the installation instructions.