NAD C 546BEE Manuale Proprietario

The C 546BEE can play back MP3/WMA files stored in external USB 
(Universal Serial Bus) devices. The following are the C 546BEE’s capabilities 
with respect to USB device playability.

USB SUPPLEMENTARY INFORMATION
Maximum number of folders supported

128

Maximum file in one folder

511

Maximum file in device

65408

Maximum number of sub-directory

8

Maximum number of bytes supported for Folder/File name

64

Maximum number of bytes supported for ID3 Title/Artist/Album

60

Maximum bit rate supported

VBR, 320K

HDD handling capacity (additional power adapter maybe required for 

some HDD models)

FAT 16/32

USB version supported

1.1

1  Toggle [SOURCE] button to select “USB” mode. If no external USB device 

is connected to the front panel’s USB input, “No USB” will be displayed 
in the VFD. If there are no applicable MP3/WMA files available in the 
external USB, the VFD will show “USB Empty”.

2  Plug-in the external USB device to the USB input – “USB Reading” will be 

blinking in the VFD and then the total number of files will displayed. 

3  Press [   ] to start playback.

The following are the steps on how to select a desired directory and MP3 or 
WMA file at stop mode.
1  Connect the external USB device to the front panel’s USB input. Toggle 

[SOURCE] button to select “USB” mode.

2  Press [FOLDER D/F ] to select desired folder. Press [ENTER].
3  Press [FILE A/S ] to select desired file number. 
4  Press [ENTER] to start playback. Toggle CD 9’s [DISP] button to show 

information about the current file. 

NOTE