NAD C 546BEE Manuale Proprietario
IDENTIFICATION OF CONTROLS
REAR PANEL
1 LINE OUT: Connect to the corresponding analog audio input of an
amplifier, receiver or stereo system.
2 DIGITAL OUT (COAXIAL, OPTICAL): The digital playback audio output
signal is available at these ports. Connect the optical or coaxial digital
OUT ports to the corresponding S/PDIF digital input of an amplifier,
receiver, computer soundcard or other digital processors.
OUT ports to the corresponding S/PDIF digital input of an amplifier,
receiver, computer soundcard or other digital processors.
3 +12V TRIGGER IN: This input allows the C 546BEE to be switched
remotely to standby and ON by ancillary equipment, such as an
amplifier, preamp, AV processor, etc. The controlling device must be
equipped with a 12 V trigger output to use this feature. Connect this
+12V-trigger input to the remote component’s corresponding +12V DC
output jack using a mono cable with 3.5mm male plug.
amplifier, preamp, AV processor, etc. The controlling device must be
equipped with a 12 V trigger output to use this feature. Connect this
+12V-trigger input to the remote component’s corresponding +12V DC
output jack using a mono cable with 3.5mm male plug.
WARNING
If the male plug of the mono cable (with or without +12V DC) is
connected to C 546BEE’s +12V TRIGGER IN, the Standby button in the
front panel as well as the corresponding ON/OFF function keys in the
remote control will be disabled. Unplug the mono cable to maintain
normal power ON/OFF function procedures.
connected to C 546BEE’s +12V TRIGGER IN, the Standby button in the
front panel as well as the corresponding ON/OFF function keys in the
remote control will be disabled. Unplug the mono cable to maintain
normal power ON/OFF function procedures.
4 IR IN: This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the C 546BEE from a remote location.
control of the C 546BEE from a remote location.
5 AC MAINS INPUT: The C 546BEE comes supplied with a separate AC
Mains cable. Before connecting the cable to a live wall socket ensure that
it is firmly connected to the C 546BEE’s AC Mains input socket first. Always
disconnect the AC Mains cable plug from the live wall socket first, before
disconnecting the cable from the C 546BEE’s Mains input socket.
it is firmly connected to the C 546BEE’s AC Mains input socket first. Always
disconnect the AC Mains cable plug from the live wall socket first, before
disconnecting the cable from the C 546BEE’s Mains input socket.
ATTENTION!
Please make all the connections to your C 546BEE with the unit unplugged. It is also advisable to power down or unplug all associated components while
making or breaking any signal or AC power connections.
making or breaking any signal or AC power connections.
2
3
4
5
1
9
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ