Marantz Reference Series SA-14S1 Manuale Proprietario
14
Preparation
Connections
Settings
Tips
Appendix
ENGLISH
Playback
Playing CDs
Playing Super Audio CDs or CDs
1
Press DISC/INPUT to change
the input source to “Disc”.
the input source to “Disc”.
2
Insert a disc.
šPress OPEN/CLOSE to open and close
the disc tray.
šYou can also close the disc tray by
pressing
1, then starts playback
automatically.
3
When playing back a Super
Audio CD, press SOUND
MODE, and select the layer
that you want to play back.
Audio CD, press SOUND
MODE, and select the layer
that you want to play back.
[Selectable items]
STEREO : Plays back the 2-channel area
of the Super Audio CD (the
default setting).
default setting).
MULTI : Plays back the multi-channel
area of the Super Audio CD.
Multi-channel is downmixed to
2-channel.
Multi-channel is downmixed to
2-channel.
CD : Plays back the CD layer of the
Super Audio CD.
4
Press
1
The
1 display lights, and playback begins.
šWhen all of the tracks recorded on the disc have finished
playing back, playback stops automatically.
n Stopping playback
Press
2.
n Stopping playback temporarily
Press
3.
šThe
3 indicator lights.
šTo restart playback, press
1.
n Fast-forwarding and Fast-reversing (Searching)
The search is started by holding down
8, 9 during
playback.
Normal playback resumes when the button is released.
Normal playback resumes when the button is released.
n Moving to the beginning of tracks (Skipping)
During playback, press
8 or 9.
šThe disc is skipped the number of tracks equal to the
number of times the button is pressed.
šWhen you press
8 once, playback restarts from the
beginning of the current track.
n Playing a specific track (Direct searching)
Use 0 – 9, +10 to select the track.
Example: Track 4 : Press 4
Example: Track 12 : Press +10 and 2
Example: Track 20 : Press +10, +10 and 0
Example: Track 4 : Press 4
Example: Track 12 : Press +10 and 2
Example: Track 20 : Press +10, +10 and 0
Basic operation
n Setting the playback sound mode in advance
(Start sound mode)
When purchased, the sound mode setting is “STEREO”.
The procedure for specifying a different first-priority layer
is given below.
The procedure for specifying a different first-priority layer
is given below.
With no disc in the disc tray,
press SOUND MODE, then switch
to the desired layer setting.
press SOUND MODE, then switch
to the desired layer setting.
šIf a disc that does not contain the layer
set for top priority playback is loaded,
the contents recorded on another layer
are displayed automatically.
the contents recorded on another layer
are displayed automatically.
šThis unit memorizes the setting. Even if you open/close the
disc tray or turn this unit off and on, the setting remains in
effect.
effect.
šThe layer detection order is as follows for discs without an
area set for the first-priority layer or discs without any layer.
q STEREO w MULTI
e CD