Olympus Camedia C-1 [c-you] Guida Utente

VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING

Erasing All Pictures (All-Frame Erase)

Check that the camera is set to the
Playback mode by holding down the

monitor button for a moment.

The following operation clears the card of all stored image data.

Operating Procedure

Select

by pressing the

arrow pad key.

Select “YES” by pressing the

arrow pad key, and then press the

OK/menu button.

Select

by pressing the

arrow pad key.

Select “YES” by pressing the

arrow pad key.

Press the

OK/menu button.

[

All of the image frame data saved in the
card will be erased.

To cancel all-frame erasure:

Select “NO” and press the

OK/menu button.

Erasure time may be prolonged if
the card has been subjected to
print reservation by DPOF (
Page 74). This is not a malfunction.

Erasure is not possible if the image

to be erased is protected or a write
protect seal is attached to the card.
(

Page 51)

Refer to the instructions accompa-

nying the provided SmartMedia
card for details on how to handle it.

1 / 3

SET

SELECT

OFF

SET

SELECT

Check the following before
erasing images

To prevent destruction of data on the card, never attempt to open the card cover,
remove the batteries, disconnect the AC adapter or remove the card during
erasure.

SET

OFF

YES

Playback mode menu 1/3 screen

Card setup screen