Traveler DC-7900 Guida Utente
EN-22
CAPTURE MODE
Recording Method
This sets the recording method at the time of capturing images. Secure the camera to
a tripod or place it on a stable surface.
a tripod or place it on a stable surface.
1. Rotate
the
mode
dial
to , , , ,
, or
.
2. Press the power switch to turn on the
power.
3. Press the four-way controller (S/
) and
use (S) to select the desired capture
mode. You can also change the setting
using four-way controller (WX).
mode. You can also change the setting
using four-way controller (WX).
4. Press the
button to confirm the setting.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture images.
6. Press the shutter release button to capture images.
In [Continuous], [AEB], and [Burst] modes, the flash mode will be set to Flash off automatically.
Capture mode
Description
Single
Captures an image at a time.
Continuous
Permits continuous photography of 3 images max.
AEB
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
underexposure and overexposure compensation.
Series+flash The “Series + flash” capture mode lets you shoot a sequence of 3
pictures with flash.
Burst
The “Burst” capture mode allows you to fully use the available
memory capacity (internal or via memory card) by pressing and
holding the shutter button. As long as you hold the shutter button
pressed, pictures are captured until the memory capacity is
exhausted.
memory capacity (internal or via memory card) by pressing and
holding the shutter button. As long as you hold the shutter button
pressed, pictures are captured until the memory capacity is
exhausted.
Captu
pture Mod
e Mode
Continuous
Continuous
OK :
OK :
OK :
Capture Mode
Continuous