Tamron SP AF 10-24 mm f/ 3.5-4.5 Di II LD Aspherical (IF) Lens Volantino
![Tamron](https://files.manualsbrain.com/attachments/4be5da3b3e5fd9a0fb32e477b3ca3060b32bed2f/common/fit/150/50/02116f69fe5ed23a570267d03b02f31f85e86a2a4a863221ef15ade752d6/brand_logo.png)
ATTACHING AND REMOVING THE LENS
* How to mount the lens
Remove the rear cap of the lens. Align the lens attachment mark on the lens barrel with
its counterpart on the camera mount and insert the lens.
In case of Nikon mount, rotate the lens counter-clockwise until it clicks into the locking
position. In case of Canon mount, rotate the lens clockwise until it clicks into the locking
position.
* How to detach the lens
Press the lens release button on the camera down.
In case of Nikon mount, rotate the lens clockwise until it unlocks from the camera.
In case of Canon mount, rotate the lens counter-clockwise until is unlocks from the
camera.
*For further details, please read the instruction manual of your camera.
FOCUSING (AUTOFOCUS)
In case of Sony cameras, switch the focusing mode switch of the camera to Auto focusing
mode (AF). In case of Nikon or Canon camera, switch the AF/MF switch on the lens to
AF. In case of Nikon camera with the focus mode selector dial, set the focus mode to “S”
or “C”, and then set the AF/MF switch on the lens side to “AF”. Press the shutter button
lightly while viewing through the camera’s viewfinder. The lens focuses automatically.
An in-focus mark will light when lens focuses on the main subject sharply. Press the
shutter button further to photograph.
* When set on AF mode, interfering with the focusing ring may cause serious damage to
the lens mechanism.
* The distance scale is marked for guidance purposes. The actual focal point may slightly
differ from the distance marked on the focal length index.
FOCUSING (MANUAL FOCUS)
Switch the AF/MF switch on the lens to MF (Fig. 6). In case of Nikon camera with the
focus mode selector dial, set the focus mode to “M”, and then set the AF/MF switch on
the lens side to “MF”. Focus manually by rotating the focusing ring while viewing
through the camera’s viewfinder. The main subject in the viewfinder will be sharp when
the lens id focused correctly.
* Even when in MF mode, turning the focusing ring while pressing the shutter button
halfway, the focus aid function lamp lights up when the picture is in focus.
* At infinity, make sure the image in the viewfinder appears sharp. The infinity position
is made with certain allowances to insure proper focus under a variety of conditions.
* For further details, please read the instruction manual of your camera.
LENS APERTURE AND AE MODE
Please follow the instruction manual of your camera.