Exegin Technologies Limited Q53R6 Manuale Utente
22
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2013
5. Configuring the Q53 on Your Network
Required TCP/IP Settings
Required TCP/IP Settings
2. If dynamic addressing is desired, then click on the radio button to the left of the
label Obtain an IP address automatically, then proceed directly to step 9 below;
this will cause the Q53 to request its TCP/IP parameters from a DHCP server over
the network.
this will cause the Q53 to request its TCP/IP parameters from a DHCP server over
the network.
To specify a static IP address, click on the radio button to the left of the label Use
the following IP address: and proceed to step 3 below.
the following IP address: and proceed to step 3 below.
3. Enter the IP address in the IP Address field.
4. Enter the Q53’s subnet mask in the Subnet Mask field.
5. [Optional setting] In order to communicate across subnets with the Q53, enter the
address of the default gateway in the Default Gateway field.
6. [Optional setting] In order to use host and domain names in addition to dotted quad
IP addresses, enter the address of the domain name server in the DNS Server
Address field.
Address field.
7. [Optional setting] Enter the suffix of the domain name for the Q53 in the DNS
Domain Suffix field.
8. [Optional setting] To change the TCP window size, select the desired value in the
TCP Window Size combo box.
9. Click on "Submit" when done.
10. Go to the Restart page and click on "Restart" to apply the new settings to your
system.