Asian Express Holdings Limited PL-1690R Manuale Utente
TAU™ WARNING:
The
TAU™ is designed for INDOOR and OUTDOOR use. The TAU™ blades revolve at high speeds and can cause damage to
the user, spectators and animals. Stand away from the TAU™ to reduce the risk of getting into the flight path. Warn
spectators that you will be flying your TAU™ so that they are aware of its position. Before flight, inspect the rotor blades to
make certain that the blades are securely fastened to the TAU™.
WARNING!
• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the battery is plugged in.
•
spectators that you will be flying your TAU™ so that they are aware of its position. Before flight, inspect the rotor blades to
make certain that the blades are securely fastened to the TAU™.
WARNING!
• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the battery is plugged in.
•
Turn off the controller and take out the battery from the TAU™ battery compartment when not in use.
• The included charger is built specifically for the TAU™ Li-Poly battery. Do not use it to charge any other battery.
• New alkaline batteries for controller are recommended for maximum performance.
• Parental supervision is recommended when flying the TAU™.
• New alkaline batteries for controller are recommended for maximum performance.
• Parental supervision is recommended when flying the TAU™.
BATTERY WARNINGS
R
ECHARGEABLE BATTERY:
This TAU™ uses a Li-Poly rechargeable battery which has limited life cycles. If battery can no longer be charged, dispose the
battery properly according to local disposal requirements.
CONTROLLER BATTERIES:
Remote control requires 2 “AAA” batteries (not included). Please read the important battery safety warning below.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel Metal Hydride).
• Do not mix old and new batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly
according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity (see inside booklet for diagram).
• Do not dispose of batteries in a fire - batteries may leak or explode.
battery properly according to local disposal requirements.
CONTROLLER BATTERIES:
Remote control requires 2 “AAA” batteries (not included). Please read the important battery safety warning below.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel Metal Hydride).
• Do not mix old and new batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly
according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity (see inside booklet for diagram).
• Do not dispose of batteries in a fire - batteries may leak or explode.
CARE AND MAINTENANCE
• Always remove the batteries from the controller when it is not being used for an extended period of time.
• To clean, gently wipe the remote control and TAU™ with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water. This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.
• To clean, gently wipe the remote control and TAU™ with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water. This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.
REPLACING THE PROPELLER BLADE
Your TAU™ propeller system is a precision instrument that may need repair or replacement from time
to time for optimal flight function. Crash landing from high-speed aerial flights may cause damage to your
TAU™’s propellers.
1. TAU™ have four blades, two gray propellers on the front, and two black propellers on the back.
Please note that the blades and the TAU™ are labeled with an embossed A or B (see the diagram F).
2. When replacing the propeller blades, gently remove the blade from the rotor
shaft. Make sure to match both the color of the blade and the indication
letter on the blade to the diagram F.
3. Replace the damaged blade with the correct blade.
to time for optimal flight function. Crash landing from high-speed aerial flights may cause damage to your
TAU™’s propellers.
1. TAU™ have four blades, two gray propellers on the front, and two black propellers on the back.
Please note that the blades and the TAU™ are labeled with an embossed A or B (see the diagram F).
2. When replacing the propeller blades, gently remove the blade from the rotor
shaft. Make sure to match both the color of the blade and the indication
letter on the blade to the diagram F.
3. Replace the damaged blade with the correct blade.
NOTE: To exit the stunt mode manually if you wish not to do the stunt roll,you can press the stunt button again
and the beeping sounds will stop too.
HOW TO DO 360º STUNT ROLLS
1. In order to make your TAU™ do 360º rolls you must fully charge your battery.
Note: The TAU™ will not do 360º stunt rolls in T-Mode, Mode1 and under low battery
Note: The TAU™ will not do 360º stunt rolls in T-Mode, Mode1 and under low battery
indication (When the LED lights on the drone is flashing slowly).
2. Once you are ready to attempt a 360º roll, simply press and let go of the "STUNT" button on the top
right hand side of your controller (see Remote Diagram D), you will hear continous beeping sounds.
This means you are now in “STUNT MODE”
right hand side of your controller (see Remote Diagram D), you will hear continous beeping sounds.
This means you are now in “STUNT MODE”
3. Now quickly move your right control stick in any of 4 directions; up, down, left or right and your
TAU™ copter will instantly roll in the associated direction. (See diagram E). And the beeping sounds
will stop.
TAU™ copter will instantly roll in the associated direction. (See diagram E). And the beeping sounds
will stop.
9
10
D
360˚Stunt-Roll
E
F
B
A
A
B
FRONT
REAR
Gray Blade Front Left = A
Gray Blade Front Right = B
Black Blade Rear Left = B
Black Blade Rear Right = A