Medeco Security Locks Inc. 20736 Manuale Utente

To unassign a key from a user, expand the node beside the user name in the tree to view the serial number of the currently assigned key.  Right
click the key number that appears under the user name, and select

 in the box that will appear below the key serial number.  When the

key is unassigned from the user, the name of the user will also be removed on the 

 table. 

A key can also be unassigned by moving the key to another available user.   When a key is not assigned to a user, it is then visible at the global
or highest 

 level.

 

 

 

 

Key Audit Setting

To effectively manage the available capacity of the key memory and the audit being recorded, the key audit memory can be configured to function
in two different modes; a "Static Audit" mode or a "Rolling Audit" mode.  More information on the description and selection of these specific key
audit modes is presented below. 

The audit mode of the Key is configured during the process of creating a 

In the 

 Mode, the key will record audit events each time the key touches a cylinder.  When the audit memory of the key is filled, the

key will become disabled until the key is again serviced (refreshed).  During servicing of the key, the audit is transferred from the key's memory to
the database, and the key once again becomes active.  The primary consideration in using a key configured in a Static Audit mode is that all audit

note that when 

000-506-808 and key 000-642-743 by creating the user Jim Walter twice noting that the login credentials are uniquely defined. 

Users with more than one key assigned will display on the Schedule Table as respective rows.

Unassigning Keys and Active Key Schedules
Note:  Keys cannot be unassigned from a User if the key is currently associated with an 

 key schedule.  If so, the key schedule

must first be 

from the Schedule page before the key can be unassigned.