Excellent Media Group Co. Ltd. E071107WL Manuale Utente

Ver.01  20. Oct 2007

One Eyewear
One Transmitter
One Receiver
Two AV (Audio/Video) Cables 
Two Power Adapters
This User's Manual

1.Earphones
2.Battery
3.Screen

1.Connection jack of the Eyewear
2.Volume control
3.Power ON/OFF switch
4.Charger indicator LED
5.Transmitter / Charger
6.Battery compartment
7.DC in jcak
8.AV in jack
9.AV out jack

1.Plug one end of the provided power adapter into a wall 
    outlet and the other end into the bottom of the Transmitter.
Note: Use the adapter labeled OUTPUT: 6V DC with the 
           Transmitter.  
2.Slide the ON/OFF/ switch to the ON position.

 

Receiver 
Loding the batteries

2

1

3

POWER

OFF ON

A/V OUT

A/V IN

DC IN

1

2

3

1.Open the battery compartment cover on the rear of the 
    Receiver.
2.Insert 3 AA-size rechargeable batteries (follow the plus 
   (+) and minus (-) signs on the diagram inside the battery 
   compartment). 
3.Close the battery compartment cover, and make sure it is 
    locked securely.
Note 1: Never mix old batteries with new ones.
Note 2: Remove the batteries from the receiver if you do
               not plan to use it for a prolonged period of time.
4.Slide the POWER switch to the ON position. 

1.Insert the Charger(Transmitter) adapter into the power
   socket.
2.Connect the Charger adapter with the Charger(Transmitter).
3.Connect the Receiver to the Charger in the direction as
   illustrated,and the Charger indicator will light red to 
   indicate that it is being charged. When the Charger indicator
   lights red off, it indicates the battery is charged
   completely.
3.When the battery is completely charged, you can remove
   the Receiver from the Charger(Transmitter).

Connect the mini plug of the provided AV cables to the AV 
jack on the rear of the transmitter; connect the other end of 
the cable to the AV jacks of the AV component labeled 
LINE OUT.

Make sure the camera and the monitor are turned on.
Make sure the power plugs are pushed all the way in.

the charger light 
will stay red

AV Sources

A/V OUT

A/V IN

DC IN

AV OUT

AV IN

TV

Transmitter

Check that the transmitter and receiver are properly 
connected to the AV components from which you want to 
send/receive the AV signal.
Check the power ON/OFF switches on the transmitter and 
receiver.
Check power switches on the remote TV and video source 
(TV game, VCR, DVD player, satellite receiver, etc.).
Make sure power plugs are pushed all the way in.
Check all cable connections.

Adjust the receiver by rotating orientations until you get 
the best reception.
If there is a microwave oven in use in the path between the 
transmitter and receiver, remove the microwave oven or 
turn it off.
Make sure the transmitter and receiver are within range of 
each other. 

Do not attempt to open the case.  Non-expert handling of 
the device may damage it.
Keep dry.  Precipitation, humidity, and liquids, contain 
minerals that will corrode electronic circuits.
Do not use or store in dusty, dirty areas.  Moving parts 
may be damaged.
Do not store in hot areas.  High temperatures can shorten 
the life of electronic devices and warp or melt certain 
plastics.
Do not store in very cold areas.  When the AV sender 
warms up (to its normal temperature), moisture can form 
inside the case, which may damage electronic circuit boards.
Do not drop, knock, or shake it.  Rough handling can break 
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong 
detergents when cleaning.
Operate this product using only the power supply included 
with it or provided as an accessory.
Do not overload electrical outlets or extension cords as this 
can result in fire or electric shock.

For customers in America
For customers in USA
The Eyewear complies with the FCC rules.

For customers in Canada
The Eyewear meets all requirements of the Canadian
Interface-Causing Euipment Regulations.

For customers in Europe
The Eyewear is registered as having a suitable level of
electromagnetic emission for home & office usage and can 
be used in all area including residential areas.

Eyewear
The next level of Entertainment !
Experience your movies and games in a new and exiting
way: Resolution: 230k pixels . Suitably for all usual video
and audio signal sources . Connectable to commercial play
consoles . Unimpaired playing by integrated headphones.

Technical Data
Aspect ratio                                  4:3
Resolution                                    320x240
Contrast ratio                                200:1
Viewing angle                              25  (diagonal)
Image size                                    50"  at 2,5m
Video system                                NTSC / PAL / SECAM
Power adapter                               6V / 800mA
Power consumption                      Max. 350mA

AV Transmit Frequency                920 MHz
AV Signal Range                          10 meters (30 feet) clear line of sight
Antenna                                        Built-in omni-directional antenna
A/V mod/demod. method             FM
Audio                                            Stereo audio input and output
Video                                            Composite video input and output
Dimensions                                   8.8 (W) x 4.6 (H) x 11.0 (D) cm 
                                                      for transmitter
                                                      5.9 (W) x 10.9 (H) x 3.9 (D) cm 
                                                      for receiver
Weight                                           85.3g / 94g transmitter/receiver
Power                                            DC 6V, 800mA  for transmitter
                                                      DC 6V, 800mA or 3 AA rechargeable
                                                      for receiver
Operating temperature                  0

 ~ 40

 (32

 ~ 104

)