PEGATRON CORPORATION IPV5K6KUSWIFI Manuale Utente

12

Because the connections 
for a high-defi nition (HD) 
or standard-defi nition (SD) 
TV are diff erent, you must 
determine if your TV is HD 
or SD. Your TV must 
receive HD signals for 
you to enjoy the benefi ts 
of HDTV. See the guide that came with your TV for more information.

See page 25

 for more information on picture formats.

Make one of the following connections for your home network:

• If your home network uses coaxial cable, use the F-Con connector on the set-

top. 

See page 13

• If your home network uses Ethernet (CAT-5) cable, use the NETWORK

connector on the set-top. 

See page 13

To connect your set-top to your network and home entertainment devices, complete these steps:

Identify the additional consumer 
electronic devices that you will 
connect to the set-top and TV. 

See pages 17 through 22

 and 

see the owner’s manual for the 
device.

Plug the set-top and the TV into an AC power source that is not controlled by a 
switch.

Make the connections for your TV, VCR, and DVD recorder as follows:

• If you are using an HDTV, 

see page 14

 and the connection diagrams in this

guide

• If you are using an SDTV, 

see page 15

 and the connection diagrams in this

guide

