Rosewill RNWD-N1502UBE Manuale Utente

Wireless N Adapter

RWND-N1501UB / RWND-N1502UBE User Manual

FAQ

This chapter provides solutions to problems that may occur during the installation and

operation of the Wireless N USB Adapter. Read the descriptions below to solve your problems.

1. The Wireless N USB Adapter does not work properly.

- Reinsert the Wireless N USB Adapter into your PC’s USB slot. Right click My Computer

and select Properties. Select the device manager and click on the Network Adapter. You will

find the Adapter if it is installed successfully. If you see the yellow exclamation mark, the

resources are conflicting. You will see the status of the Adapter. If there is a yellow question

mark, please check the following:

- Make sure that you have inserted the right adapter and installed the proper driver. If the

Adapter does not function after attempting the above steps, remove the adapter and do the

following:

- Uninstall the driver software from your PC through Control Panel’s “Add or Remove

Programs”.

- Restart your PC and repeat the hardware and software installation as specified in this User

Guide.

2. I cannot communicate with the other computers linked via Ethernet in the

Infrastructure configuration.

- Make sure that the PC to which the Adapter is associated is powered on.

- Make sure that your Adapter is configured on the same channel and with the same

security options as with the other computers in the Infrastructure configuration.

3. What should I do when the computer with the Adapter installed is unable to

connect to the wireless network and/or the Internet?

- Check that the LED indicators for the broadband modem are indicating normal activity. If

not, there may be a problem with the broadband connection.