TTE Technology L42FHDE30 Manuale Utente

14

Frequency Range: displays the different graphic  

equalizer names set for each sound preset

 option.  

Choose a band and make adjustments. When  

making adjustments, the 

Equalizer option  

automatically changes to 

Personal. Press ◄/► 

to select the desired frequency (100Hz, 300Hz, 

1KHz, 3KHz, 10KHz) you wish to adjust. Use 

▲/▼ to adjust the level. When you have finished 

adjusting the levels, press 

MENU to exit.

Balance: adjust the amount of audio sent to the left 

and right speakers.
Surround: option On/Off. When turned on, this 

option enables a mode which simulates a surround 

sound effect.
Speaker: option On/Off. When you select the Off 

option, the sound speaker on the TV will be turned 

off.
SPDIF Type: this option controls the type of audio 

stream sent to the Digital Audio Output jack. 

Available options are 

Dolby Digital, PCM, or Off. 

Auto Volume Control: option On/Off. This option 

reduces the annoying blasts in volume that often 

occur during commercial breaks, and also amplifies 

softer sounds in program material, eliminating the 

need for constant volume adjustment. 
Analog TV Sound: this option controls the manner 

in which the sound comes through your speakers. 

Options available vary according to the input 

selected. 

this option plays the sound in mono only. Use 

this setting when receiving broadcasts with weak 

stereo signals.
Stereo : this option splits the incoming stereo 

audio signal into left and right channels. Most TV 

programs and recorded materials have stereo 

audio. The word “Stereo” appears in the 

Banner when you tune to a program that is 

broadcast in stereo.
Second Audio Program (SAP): this option plays 

the program’s audio in a second language, if  

available. The letters “SAP” appear in the Channel  

anner when you tune to a program that is broadcast  

with SAP information. SAP audio is broadcast in  

mono only. SAP is also used to broadcast a  

program’s audio with descriptions of the video for 

the visually impaired.

Default Audio Language: choose the language you 

prefer for dialog on digital channels. If the preferred 

language is not broadcasted with the program, 

then the TV plays the default audio for the program 

(usually 

English in the US). There are 3 available 

default languages (

English, French, Spanish).

available for digital channels.
Current Audio Language: press ◄/► to choose 

from the list of languages available for the program 

you’re watching. The language chosen becomes 

your preferred language for all digital channels until 

you turn the TV off. If the language chosen is not 

being broadcasted with a program, the TV plays the 

default language for the program (usually 

English in 

the US).
Note: The Current Audio Language option is only 

The 

Setup Menu allows you to configure the TV 

with your preferences. Press 

MENU on the remote 

to open the Main Menu. Press ▲/▼ to select 

Setup; 

then press 

OK/► to display the following options:

(Refer to Figure 3.)
Signal Type: choose the type of signal (Cable/Sat 

or Antenna) you have connected to the ANT/

CABLE/SAT IN.

When you perform a Channel Scan, your TV

searches for channels with signals and stores the 

channel information in the Channel List. Then, as 

you watch TV and press 

CH+ or CH-, your TV goes 

to the next or previous channel in the Channel List 

and skips the channels that do not have signals.

If the TV signal source changes – for example, if you 

change from an outdoor antenna to cable TV – you 

will need to rescan for channels.
To automatically scan for channels:

1. After choosing a signal type, press ▲/▼ to 

highlight 

Channel Scan.

2. Press 

OK/► to start the scan. You can see the 

search progress and how many channels are 

found in the on-screen menu. (Note: If you wish 

3.  After the scan is complete,  press the 

  button to return to the previous menu, or press the  

 

CLEAR button to close the menu.

You can hide channels in the Channel List. Then, 

when you press the

 CH+ or CH- button, the TV will 

skip the hidden channels. You can still tune to these