Godex International Co. Ltd. 6PDL7 Manuale Utente

The ribbon shaft tension can be 
adjusted by turning the ribbon shaft 
knob clockwise or counterclockwise. 
There are 4 different levels of tension 
and marked with 1~4 on both knobs of 
Ribbon Rewind Shaft and Ribbon 
Supply Shaft. 1 represents the strongest 
tension and 4 is the weakest tension. 
When the tension is too weak to pull the 
ribbon, please decrease the tension of 
Ribbon Supply Shaft or increase the 
tension of Ribbon Rewind Shaft. To 
adjust the ribbon shaft knob, please 
push the knob inward and then start to 
turn.   
 
If the ribbon wrinkles occurs during 
printing due to the differences of ribbon 
materials, please increase the tension 
by turning Ribbon Rewind Shaft Knob 
clockwise. (For more detail about the 
ribbon wrinkle problem, please refer to 
Chapter5-6) 
 
If a narrower ribbon is used (especially 
when ribbon width is less than 2”), the 
printer might have problem to pull the 
labels. In this case, please decrease the 
tension by turning Ribbon Supply Shaft 
Knob counterclockwise. Moreover, the 
Ribbon Roll maybe difficult to be 
removed because of the shape-change 
that result from over-power tension. In 
this case, please decrease both 
tensions of Ribbon Supply Shaft and 
Ribbon Rewind Shaft by turning Knobs 
counterclockwise. 

 

+

-

 

DuraLabel 7000 User’s Manual 
 

39