Changsha SunSky Electronic Design & Development Co. Ltd. SUNVOTEB3X Manuale Utente
MANUAL
Thanks for purchasing our product. Please read this manual carefully
before starting to use this device. When you use this device, you are supposed
to learn well of this product.
1. Connection
First confirm the install USB driver in your computer, then put PVS-3000
USB receiver to USB port on your computer. The status LED will twinkle every
half one second.
If your Computer isn’t installed the USB driver, it will prompt you a
new device found after putting PVS-3000 USB receiver in Computer, please
install USB driver and assure the correct installation.After installing USB
driver, please click “My computer” by the right key of mouse, and enter
“System property->hardware->device manager” to check if there is a new COM
port in “PORT (COM & LPT)”, and remember the COM Port.
From now on, the COM port will appear in “Device manager” after putting
in USB receiver, otherwise the installation is incorrect.
2. COM Port Set
Generally, when you use the system at the fist time or voting test is
incorrect, you should set the COM Port, other time you needn’t.After logging
in the application software, please check if the COM port number iscorrect
in “System set” or “Device set”. (If it can read USB receiver configures,
which means connection is successful, otherwise please check the COM
port.Maybe system software can support automatically COM port set, namely
find the USB receiver COM port automatically.
Note: Only when COM port is correct software can communicate with USB
receiver.