Veoneer US Inc. 77MMRV1 Manuale Utente
The device under test is manufactured by the grantee (Autoliv ASP, Inc.), and sold as
an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee
must ensure the end-user has all applicable / appropriate operating instructions. When
end-user instructions are required, as in the case of this product, the grantee must notify
the OEM to notify the end-user.
Autoliv ASP, Inc. will supply this document to the reseller/distributor dictating what
must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (
in blue
) must be included in the end product user’s
manual to ensure continued FCC and Industry Canada regulatory compliance.
The ID numbers must be included in the manual if the device label is not readily
accessible to the end user. The compliance paragraphs below must be included
in the user's manual.
The ID numbers must be included in the manual if the device label is not readily
accessible to the end user. The compliance paragraphs below must be included
in the user's manual.
******************************************************************************
Model: 77 GHz MMRV1
FCC ID: WU877MMRV1 IC: 8436B-77MMRV1
This device complies with Part 15 of the FCC Rules and with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
(2) (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The term “IC:” before the radio certification number only signifies that Industry Canada
technical specifications were met.
******************************************************************************
Autoliv ASP Inc.
Autoliv Electronics America
26545 American Drive
Southfield, MI 48034