GN Hearing A/S BTB-1 Manuale Utente
10
11
Pairing to hearing instruments
Note! The following information is intended primarily for your hear-
ing care professional, who in most cases will complete the tasks
that are necessary before the ReSound Unite Phone Clip can
be used with your hearing instruments. However, the process is
designed to be simple and should be easily accomplished by
almost anyone.
1. Make sure resound unite Phone Clip is turned on. Your hear-
Note! The following information is intended primarily for your hear-
ing care professional, who in most cases will complete the tasks
that are necessary before the ReSound Unite Phone Clip can
be used with your hearing instruments. However, the process is
designed to be simple and should be easily accomplished by
almost anyone.
1. Make sure resound unite Phone Clip is turned on. Your hear-
ing instruments must be off – open the battery door.
2. With the tip of a pen or similar object, press the small pairing
button on the back of your resound unite Phone Clip device
hidden by the bottom cover (see picture below). Press shortly
until the Led indicator turns to solid blue. Your resound unite
Phone Clip will remain in pairing mode for 30 seconds.
hidden by the bottom cover (see picture below). Press shortly
until the Led indicator turns to solid blue. Your resound unite
Phone Clip will remain in pairing mode for 30 seconds.
Getting Started
Charging the Battery
Before using your resound unite
Phone Clip, you need to fully
charge the rechargeable battery.
To charge it, plug the charging
cable as shown in the picture be-
low. Then plug the other end of
the charging cable into a power
outlet.
during the charging process, the
Led indicator will show a solid red
light. A solid green light will indi-
cate the fully charged status.
Charging an empty battery typi-
cally takes about 3 hours. it is
safe to leave the charger connected overnight – the battery can-
not be overcharged.
• When charging your ReSound Unite Phone Clip for the first
Charging the Battery
Before using your resound unite
Phone Clip, you need to fully
charge the rechargeable battery.
To charge it, plug the charging
cable as shown in the picture be-
low. Then plug the other end of
the charging cable into a power
outlet.
during the charging process, the
Led indicator will show a solid red
light. A solid green light will indi-
cate the fully charged status.
Charging an empty battery typi-
cally takes about 3 hours. it is
safe to leave the charger connected overnight – the battery can-
not be overcharged.
• When charging your ReSound Unite Phone Clip for the first
time, leave it to charge for at least 3 hours, even if the battery
indicator turns into a solid green light earlier.
indicator turns into a solid green light earlier.
• For safety reasons, recharge the battery only with chargers
supplied by resound.