System Planning Corporation GTLITEV3 Manuale Utente

Pagina di 139
GlobalTrak ™ 
GT Lite Operation and Maintenance Manual 
 
GPRS: CREG reports: 
This statement indicates that GT Lite is searching to register on a GSM network.  It will be 
displayed once per second until registered or the GSM timeout is reached. 
GPRS: GPRS has successfully connected! 
This statement indicates that GT Lite has successfully registered on a GSM network. 
GPS: Powering on the GPS 
This statement indicates the beginning of GPS acquisition.  At this statement the GPS module 
is powered on. 
GPS: (GetGpsFix) Started hot fix timer. 
This statement indicates that the hot fix timer for GPS acquisition has started. 
GPS: (HotFixTimer) Hot fix timer expired. 
This statement indicates that the hot fix timer for GPS acquisition has expired. 
GPS: (HotFixTimer) Started cold fix timer. 
This statement indicates that the cold fix timer for GPS acquisition has started. 
GPS: (HotFixTimer) SendingAssistNow request. 
This statement indicates the beginning of a GPS assistance request.  Many statements 
concerning low level assistance processing will follow. 
TCP: Got WIP_CEV_READ 
This statement indicates a read over TCP/IP.  This is typically seen during assistance 
download, OTA code download, or receipt of GPRS configuration message. 
TCP: PEER_CLOSE received 
This statement indicates that a transfer over TCP/IP has completed. 
GPS: ASSISTNOW_TRANSFER_COMPLETE 
This statement indicates that assistance data has been successfully been downloaded to the 
GPS module. 
GPS: (ColdFixTimer) Cold fix timer expired 
This statement indicates that the cold fix timer for GPS acquisition has expired and GPS 
acquisition has failed to get a 3D fix. 
GPS: (ColdFixTimer) Valid fix not obtained 
This statement indicates that no valid fix, 2D or 3D has been received in the time allotted for 
GPS acquisition.  In this case the last valid fix will be provided. 
  Prepared:  R. Straz 
Date: July 25, 2007 
 
Page 62 of 
139