System Planning Corporation GTLITEV3 Manuale Utente
GlobalTrak ™
GT Lite Operation and Maintenance Manual
AT+PARAM=”GPRSENABLE”
Expected Response:
APPLICATION: (SYSSTAT_ParamCommandHandler) Enter.
+SYSSTAT: GPRSENABLE=<gprs>
+SYSSTAT: GPRSENABLE=<gprs>
OK
<gprs>: GPRS enable status.
0 = Disabled
1 = Enabled
Set GPRS Enable Parameter
Set a new value for the GPRS Enable parameter.
Command:
AT+PARAM=”GPRSENABLE”,”<gprs>”
<gprs>: GPRS enable status.
0 = Disabled
1 = Enabled
Expected Response:
OK
View SMS Enable Parameter
View the current status of the SMS Enable parameter.
Command:
AT+PARAM=”SMSENABLE”
Expected Response:
APPLICATION: (SYSSTAT_ParamCommandHandler) Enter.
+SYSSTAT: SMSENABLE=<sms>
+SYSSTAT: SMSENABLE=<sms>
OK
<sms>: SMS enable status.
<sms>: SMS enable status.
0 = Disabled
1 = Enabled
Set SMS Enable Parameter
Set a new value for the SMS Enable parameter.
Command:
AT+PARAM=”SMSENABLE”,”<sms>”
<sms>: SMS enable status.
0 = Disabled
1 = Enabled
Prepared: R. Straz
Date: July 25, 2007
Page 73 of
139