Ingenico IMP3XXCX Manuale Utente
iMP 3xx
•
13/20
Copyright © 2010 Ingenico
900004435 R11 000 02
All rights reserved
The iMP3xx has been designed to be able to charge the i-phone/i-pod touch while
operating.
A charging dock is available as a separate accessory. It connects on the charging pads, and
features guiding in the cradle to ensure connection.
The iMP3xx can also be charged using the charger provided in the package. The charger has
to be plugged on the micro-USB connector. Please refer to section 2.1.
4.5.
Positioning the terminal
Install the terminal on a flat surface, with an easy access to an electrical outlet if needed. Place
the terminal away from any heat source and protected from dust, vibrations and
electromagnetic radiations (away from video terminals, PC, anti-shoplifting barriers, ...).
the terminal away from any heat source and protected from dust, vibrations and
electromagnetic radiations (away from video terminals, PC, anti-shoplifting barriers, ...).
Terminal Location
Positioning of the IMP3xx must be in such a way to make cardholder PIN (Personal
Identification Number) spying infeasible.
Positioning of the IMP3xx must be in such a way to make cardholder PIN (Personal
Identification Number) spying infeasible.
4.6.
Power on / off
To power on the IMP3XX connect the battery and press green key.
To power off the IMP3XX press yellow key.
4.7.
Connection
4.7.1.
USB cable connection
A USB connector is located on the front of the terminal.
•
Present the device in front of the connector and plug it
Micro-USB connector
Charging pads (used with charging dock only)