Instant Care Inc. IC315-PB23 Manuale Utente
z
Operation
z
After the Panic Button is learned successfully, press the Button to activate a Panic Alarm.
z
Press and hold the Button for 8 seconds or more will send a Cancel Code to the Control Panel
to stop the alarm. (This function is not compatible with all control panels.)
to stop the alarm. (This function is not compatible with all control panels.)
z
Installation
A Pad is included into the Panic Button as picture shown below. The padding helps to avoid pressing
the button accidently when mounting the Panic Button.
the button accidently when mounting the Panic Button.
There are two ways to deploy the Panic Button: Wall Mounting and Surface Deployment. After
successfully installed the Panic Button, please gently remove the Pad.
successfully installed the Panic Button, please gently remove the Pad.
z Wall Mounting
The Panic Button can be wall mounting using Velcro tape provided.
1 Clean the wall mounting location and back of the Panic button with degreaser. Do not mount
on wall with cracking paint or rough surface.
2 The Velcro tape can be separated to Hook and Loop side (Picture 1). Remove the protective
cover of the Hook side (Picture 2) and apply to desired mounting location. (Picture 3)
Picture 1 Picture 2 Picture 3
3 Remove the protective cover of the Loop side and apply to back of the Panic Button.
(Picture 4)
Picture 4
4 Hook the Panic Button onto mounting location.
Loops
Hooks
Pad