Essence Security International ltd. ES6500EGE Manuale Utente
Operation
38
EverGuard Express
To Edit the Dialer Settings:
1. On the Installation screen, roll the trackball to the Dialer Settings
icon.
2. Click the icon. The Editing Dialer Settings screen appears.
3. Modify the settings as in the procedure for configuring Dialing Settings.
3.20.1.4 Configuring the Operation Code
The Operation Codes are listed in the table below.
Code
Description
Trigger
NTS
Set up
Preset
ITS
Testing
End Installation
CCS
Operating
Panel activation
by:
by:
1 – Monitoring
station operation
(command)
station operation
(command)
2 – ESI-CMS
3 – Blackberry
Table 15: Operation codes
The operations codes are set by the control center depending on the trigger.
If need be, the code can be changed, i.e., from CCS to ITS or NTS, via the Atlas
system, before new peripheral devices are added.
system, before new peripheral devices are added.
Configuring the Operation Code is available only to control panels that have not
yet been set in operating mode (CCS).
yet been set in operating mode (CCS).
. To enter the Operation Code:
1. On the Installation screen roll the trackball to the Operation Code
icon.