Essence Security International ltd. ES6500EGE Manuale Utente
Operation
56
EverGuard Express
Configuration, set the following parameters:
Ack Timeout –Defines the maximum amount of time (in seconds) that
the system waits to receive an acknowledge message before continuing to
the next dialing option.
the next dialing option.
Number of Retries – Defines the number of times the dialer retries.
Retry Timeout – Defines the number of seconds the dialer waits before
retrying.
Min GSM Level – Defines the minimum GSM RSSI level. If the RSSI is
below the selected value, the channel will not be available.
4. For Cycle Permanent (minutes), sets the amount of time in minutes that
the channel will not be available.
SMS
GSM DATA
GPRS
5. For GSM Configuration, set the Min GSM Voice Level parameter to the
minimum volume level of the GSM voice.
6. For Video Configuration, set the parameters for the GSM Packet Delay
Time (in milliseconds).
7. Click Close. You are returned to the Control Panel screen.
3.20.2.7 GPRS Configuration
Using the GPRS Configuration dialog box, configure the destination servers for
indoor/outdoor photos. The APN (GPRS) Configuration screen is divided into the
following parameters sets:
indoor/outdoor photos. The APN (GPRS) Configuration screen is divided into the
following parameters sets:
Test Scenario Configuration – used during system testing and when
modifying the configuration
modifying the configuration
Comfort Scenario Configuration – used when the end user tests the device
Security Scenario Configuration – set for normal use
Note: When the GPRS Configuration dialog box is initially opened, all
checkboxes are unmarked, and all of the parameters are dimmed and not
configurable.
checkboxes are unmarked, and all of the parameters are dimmed and not
configurable.
To configure the APN (GPRS) Configuration:
1. On the Control Panel screen, click GPRS Configuration button. The APN
(GPRS) Configuration dialog box appears.