Essence Security International ltd. ES7000EG Manuale Utente
Installation
12
EverGuard Control Panel
Antenna Connector
Board-to-Board Connector (back view only)
2.2.1.2 Antenna and Coaxial Cable
The figure below displays the Antenna and Coaxial Cable.
The GSM/GPRS Antenna is comprised of:
Antenna
COAXIAL Cable
Antenna Connector (at the end of the COAXIAL Cable)
2.2.1.3 GSM/GPRS Modem Connector
The GSM/GPRS Modem Connector is inside the ES7000EG control panel, on the
upper left corner of the printed circuit board. It connects to the bottom of the
GSM/GPRS Modem and contains:
upper left corner of the printed circuit board. It connects to the bottom of the
GSM/GPRS Modem and contains:
Three screw hole posts
Board-to-Board Connector
To install the GSM/GPRS modem:
1. Connect the coax cable connector of the antenna to the antenna
connector of the GSM/GPRS modem.