Essence Security International ltd. ES7000EG Manuale Utente

Operation

EverGuard Control Panel

3.2.9

S.O.S function

In case of emergency, the user should press on the S.O.S button and then the
system will notify the central monitoring station.

When the LED stays permanently red it means that the S.O.S signal has been
received correctly.

A single status LED provides the S.O.S status information. An audible S.O.S beep
is sounded to indicate acknowledgement when an S.O.S message is sent. The
table below details the S.O.S status indicators of the ES7000EG control unit.

Table 12: S.O.S Status Indicators

Sending
Message

Red

Flashing

S.O.S beep The period between engaging

S.O.S and receiving ACK for
the message

S.O.S State,
After Receiving
ACK

Red

After receiving ACK, for S.O.S
message, before verification
call

No S.O.S

Off

When no S.O.S is
engaged/after verification call

3.2.10

Monitoring Station Status

A single status LED provides the Monitoring Station general status. An audible
“good beep” is sounded when the Monitoring Station button is pressed. The
table below details the Monitoring Station status indicators of the ES7000EG
control panel.

Table 13: Monitoring Station Status Indicators

Call Monitoring
Station Request

Red

After receiving message
requesting to connect the
Monitoring service by pressing
the Monitoring Station
button

Calling Monitoring
Station/No
Monitoring Station
Request Received

Off

Good beep After pressing Monitoring

Station button/no call request
is sent