Essence Security International ltd. ES700TR5 Manuale Utente
For more information, go to:
www.essence-grp.com
© 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice
Tag Reader
ES700TR5
Wireless Access Control RFID Tag Reader with 5 Buttons
11
Lifestyle
Product
Specifications
The simplest and most user-friendly control node / access
control unit. It features:
control unit. It features:
•
User’s identity verification using RFID technology
implemented in a portable Tag (ES700TAG) carried by the
user.
implemented in a portable Tag (ES700TAG) carried by the
user.
•
Has ARM, DISARM, partial ARM, Perimeter ARM, bell, SOS,
open and close door functions.
open and close door functions.
•
The ES700TAG Tag is an elegant device, comfortable to use
and carry, light-weight and easily attached to a keychain. Due
to its RFID passive technology, it requires no battery.
and carry, light-weight and easily attached to a keychain. Due
to its RFID passive technology, it requires no battery.
•
Extremely easy and simple to use
“Plug-&-Play” state-of-the-art Wireless security system:
•
User-friendly
•
Utilizes cutting-edge technology
•
Bidirectional RF wireless communication
•
Battery operated
•
Easy to install
•
Nonintrusive, state-of-the-art design
COMMUNICATION:
•
Bi-directional: End-to-End Bi-Directional ESI protocol
•
Advanced radio supervision algorithm
•
Up to 700 meters / 2296 ft. RF range (open air)
•
Modulation and Frequency: BFSK , 868.3 for Europe MHz or 916.5
MHz for USA
MHz for USA
•
RFID modulation: ASK, 13.56MHz
•
Encoding: 32-bit ID, over 4 billion combinations
SECURITY:
•
Tamper mechanism when removed from wall mount
•
Unique electronic serial number
POWER CONSUMPTION:
•
Used 3 standard AA Alkaline batteries
•
Long operational period (36 months)
•
Tag is a passive unit and does not require a power source
SIZE and WEIGHT:
•
Dimensions:
•
Tag Reader: 90x90x25 mm / 3.5x3.5x1 In. (LxWxD)
•
Tag: 50x34x7 mm / 2x1.3x0.3 In. (LxWxD)
•
Weight:
•
Tag Reader: 135 gr. / 0.3 lb. (excluding batteries)
•
Tag: 10 gr. / 0.02 lb.
ENVIRONMENT:
•
Operating Ambient Temperature range: -10°C ~ 55°C / 14°F ~ 131°F
•
Humidity: up to 95%, non condensing
CERTIFICATION:
•
CE: CE mark, EMC/EMI according to
ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996,
ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996,
EU Directive 1999/5/EC for R&TTE
•
Radio: ETSI EN 300 220-3, ETSI EN 300 220-1, CEPT/ERC
Recommendation 70-03, EN 50131-5-3:2005 + A1:2008
•
Safety: EN/IEC60950-1, TUV : UL 60950-1
•
Security & Alarm systems: EN 50131-1:2006 + A1:2009 Class-II Grade-
2, EN50131-6:2008 Type-C
2, EN50131-6:2008 Type-C
•
Environmental Regulation: RoHS 2002/95/EC
•
Reliability (Mechanical & Environmental conditions):
EN 50130-5:1999 and IEC 60068
EN 50130-5:1999 and IEC 60068
•
Manufacturing and Materials Standards: ISO 9001:2008,
ISO 14000
Certifications and approvals:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance (Essence Security International Ltd.) could void the user’s authority to operate the
equipment.
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance (Essence Security International Ltd.) could void the user’s authority to operate the
equipment.
WARNING! To comply with FCC RF exposure compliance requirements, the device should be located at
a distance of at least 20 cm from all persons during normal operation. The antennas used for this
product must not be co-located or operated in conjunction with any other antenna or transmitter.
a distance of at least 20 cm from all persons during normal operation. The antennas used for this
product must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with FCC Rules Part 15. Operation is subject to the following two
conditions:
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation
cause undesired operation