Essence Security International ltd. ES8000GP Manuale Utente
COMMUNICATION:
•
Up to 600m RF range (open air)
•
ECOP bi-directional radio protocol (on board)
•
Modulation and Frequency: DSSS ,2.4GHz (2.425GHz IEEE
802.15.4)
802.15.4)
•
GSM approved by FCC ID:RI7HE910NA & IC:5131A-HE910NA
SECURITY:
•
Data Security: AES encryption
•
Unique electronic serial number
POWER SUPPLY:
•
100-240VAC Wall charger + battery backup
•
Prolonged operation time without an external power source
•
1,400mAH Li-polymer rechargeable battery
•
5V DC power supply via mini-USB connector
SIZE & WEIGHT:
•
Size: H-41mm/ L-140mm/ W-75mm
•
Weight: 165 grams
ENVIRONMENT:
•
Operating Ambient Temperature range -5°C - 50°C
•
Storage Ambient Temperature range -20°C - 60°C
•
Humidity: Up to 95% non-condensing
Lifestyle
Sleek Gateway managing & communicating with We.R system and
peripherals, it features:
• Provides users remote access to control and manage the system remotely
peripherals, it features:
• Provides users remote access to control and manage the system remotely
via mobile handset, web portal
• Automatic APN setting
• Relays stream to a designated device (mobile phone, PC, etc.)
• Supports up to 64 peripherals
• Battery backup
Accessories:
• Relays stream to a designated device (mobile phone, PC, etc.)
• Supports up to 64 peripherals
• Battery backup
Accessories:
• Rechargeable battery
• LAN cable (1 m)
• LAN cable (1 m)
Product
The We.R family creates a better home & family lifestyle experience:
• User-friendly
• Utilizes top-level technology
• Fully RF wireless communication and battery operated
• Easy to install
• Utilizes top-level technology
• Fully RF wireless communication and battery operated
• Easy to install
Control Panel
ES8000GP
Plug & Play Wireless Gateway
Plug & Play Wireless Gateway
Specifications
•
CERTIFICATION:
CERTIFICATION:
•
FCC ID:YXG-ES8000GP
For more information, go to:
www.essence-grp.com/pages/WeR/Home
Certifications and approvals:
• Easy to install
• Comfortable state-of-the-art design
• Comfortable state-of-the-art design
© 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice
This device complies with FCC Rules Part 15 and with Industry
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance (Essence
Ltd.) could void the user’s authority to operate the
equipment.
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance (Essence
Ltd.) could void the user’s authority to operate the
equipment.
WARNING! To comply with FCC and IC RF exposure compliance
requirements, the device should be located at a distance of at least
20 cm from all persons during normal operation. The antennas used
for this product must not be co-located or operated in conjunction
with any other antenna or transmitter.
requirements, the device should be located at a distance of at least
20 cm from all persons during normal operation. The antennas used
for this product must not be co-located or operated in conjunction
with any other antenna or transmitter.
Le dispositif doit être placé à une distance d'au moins 20 cm à partir
de toutes les personnes au cours de son fonctionnement normal. Les
antennes utilisées pour ce produit ne doivent pas être situés ou
exploités conjointement avec une autre antenne ou transmetteur.
de toutes les personnes au cours de son fonctionnement normal. Les
antennes utilisées pour ce produit ne doivent pas être situés ou
exploités conjointement avec une autre antenne ou transmetteur.