Essence Security International ltd. ES800MGL Manuale Utente
Installing WeR@Home™
WeR@Home™ Installation Guide
11
Figure 7: Insert the Battery and Close the Remote Control
When pairing succeeds, a screen appears displaying the default remote control name.
11. Tap OK. The remote control appears in the list on the Devices screen.
2.5. Installing the Peripheral Devices
Installing the peripheral devices involves:
Choosing a suitable location
Adding each device to WeR@Home™ by pairing the device with the hub. Pairing allows the
device to communicate with the hub. Devices included in a kit are pre-paired.
device to communicate with the hub. Devices included in a kit are pre-paired.
Installing the device in the chosen location
NOTE:
If there are difficulties in communications between the hub and an
installed device, consider using a smart repeater. Refer to 2.6 Installing a
Smart Repeater on page 34.
installed device, consider using a smart repeater. Refer to 2.6 Installing a
Smart Repeater on page 34.
Peripherals are installed using mounting-tape. As an alternative, you can
install using screws. Refer to Appendix D Installing with Screws on page 52.
install using screws. Refer to Appendix D Installing with Screws on page 52.