Essence Security International ltd. ES800MGL Manuale Utente
Installing WeR@Home™
WeR@Home™ Installation Guide
37
NOTE:
You must connect the Z-Wave dongle, any Z-Wave or NEST devices, or
HD cameras, to a hub and not to a repeater.
2.7. Testing the Signal Strength of Peripheral Devices
Once you have added a peripheral device to your WeR@Home™, you can test the signal strength.
NOTE:
You cannot check the signal coverage for a tag or a remote control.
To test the signal strength:
1. Tap
. The main menu appears.
2. Tap DEVICES. The Devices screen appears.
3. Tap the device whose signal strength you want to check. Device settings are displayed.
4. Tap Test Signal Strength, and follow the on-screen instructions. WeR@Home™ tests the signal
strength and displays the result as one of the following:
Red – signal strength is low. Find a location for the device with better signal coverage.
Orange – signal strength is acceptable. Consider finding a location for the device with better
signal coverage.
signal coverage.
Green – signal strength is good.
Green with red exclamation mark – signal strength is good, but the device is too close to the
hub. Find a location for the device that is further away from the hub.
hub. Find a location for the device that is further away from the hub.