Essence Security International ltd. ES800MGL Manuale Utente
Installing with Screws
56
WeR@Home™ Installation Guide
To install the flood sensor using screws, position the sensor in the desired location and perform steps
4 through 8 of the transmitter installation procedure.
4 through 8 of the transmitter installation procedure.
Figure 52: Mounting the Sensor Base with Screws
Siren
The mounting base has three holes for installation using screws.
To install the siren using screws:
1. Release the siren mounting base by lifting the tab and sliding the base in the tab’s direction.
Figure 53: Releasing the Siren Mounting Base
2. Remove the punch-outs using a flat screwdriver.
3. Place and hold the base on the desired mounting location.