Amcrest Technologies LLC BC911M14 Manuale Utente

Setup

Camera Setup
Power Supply - Using AC Power

2

1. Plug one end of the provided power adapter into a wall outlet and the other

    end into the back of the camera.

2. Press the ON/OFF button to turn on the camera. The LED (green light) on the camera 

     will light up.

Note : Press and hold the ON/OFF button for about 2 seconds to turn off

            the camera.

1. Open the battery compartment cover on the rear of the monitor.

2. Insert the battery with the metal facing the battery compartment.

3. Close the battery compartment cover, and make sure it is locked securely.

4. Press the POWER button       to turn on the monitor.

Monitor Setup
Power Supply

The monitor uses a Lithium-ion rechargeable battery, or the household power

adapter.

When Battery is in low level after loading the battery, the LED (greed light)  will start 

blinking and need to recharging.

1. Plug one end of the provided power adapter into a wall outlet and the other end

    into the monitor.

2. The  LED (red light) will light up when the battery is charging . 

3. When battery is fully charged, the  LED (red light) will turn off .

Night Vision

The camera has eight high-intensity LEDs for picking up clear images in the dark.

When the light sensor detects low ambient light levels, the LEDs will be automatically

activated. Press the brightness up button       and down button       at the same time on

the monitor unit to enable/disable/auto the night vision function.

The on-screen-display (OSD) will notify you the night vision function is set to

ON/OFF/AUTO. 

1. Plug one end of the provided power adapter into a wall outlet and the other end

    into the monitor.

2. Press the POWER button       and to turn on the monitor.

Note 1 : When power on the monitor, the LED (green light) will light up.

Note 2 : Press and hold the POWER button       for about 2 seconds to turn off the

                monitor.