ICable System Co. Ltd. ICS-G101C Manuale Utente
Page 18
BLINKING
PSTN line is detected and in use
6.0 Troubleshooting
There is no dial tone:
1. Check to make sure that your phone is plugged into the ICS-G101C’s “TEL
port”
2. Check to make sure that the “TEL” light is on. If the TEL light is not on check
all of the connections and then reboot the xDSL or Cable modem.
7.0 Calling Features
Call Hold
1. During a call, (regardless of an incoming call or an outgoing call)
2. Push
1. During a call, (regardless of an incoming call or an outgoing call)
2. Push
the
FLASH hook (you will hear the stutter dial tone)
3. Hang
up
4. In order to return the previous call, pick up the handset.
Call Waiting
Call Waiting
1. During a call, (regardless of an incoming call or an outgoing call)
2. When there is another incoming call, the call waiting tone will sound every 5
2. When there is another incoming call, the call waiting tone will sound every 5
seconds.
3. If you want to receive the incoming call, please push the FLASH hook. Your
phone will be switched to the other call after placing the first call on hold.
4. Use the FLASH hook as long as you want to switch between the 2 calls.
Three-way Call
1. During a call, (regardless of an incoming call or an outgoing call)
2. If you want to make an another call, please push the FLASH hook, then you will
2. If you want to make an another call, please push the FLASH hook, then you will
hear the stutter dial tone
3. Dial your second destination number after the stutter dial tone
4. After the second call has established, push the FLASH hook, and enjoy the
4. After the second call has established, push the FLASH hook, and enjoy the
three-way calling.
How to set Call Forwarding
1. During the dial tone (after you pick up the handset)
2. Please dial "*72 + telephone-number"
2. Please dial "*72 + telephone-number"