Giant Telecom Limited LYAC Manuale Utente

Portable Radio Operation and EME Exposure 
Antenna Care 
Use only the supplied antenna. Unauthorized antennas, 
modifications, or attachments could damage the radio and may 
violate FCC regulations. 

Do NOT hold the antenna when the radio is “IN USE.” Holding 
the antenna affects the effective range. 

Body-Worn Operation 
To maintain compliances with FCC/Health Canada RF exposure 
guidelines, if you wear a radio on your body when transmitting, 
always place the radio in a Olympia-supplied or approved clip, 
holder, holster, case or body harness for this product. Use of  
non-Olympia-approved accessories may exceed FCC/Health 
Canada RF exposure guidelines.

If you do not use one of the Olympia-supplied or approved body-
worn accessories and are not using the radio held in the normal  
use position, ensure the radio and its antenna are at least 1 inch 
(2.5 cm) from your body when transmitting. 

Note: Nearly every electronic device is susceptible to 
electromagnetic interference (EMI) if inadequately shielded, 
designed or otherwise configured for electromagnetic 
compatibility. This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 
1.  This device may not cause harmful interference; and 
2.  This device must accept any interference received, including 

interference that may cause undesired operation. 

Facilities 
To avoid electromagnetic interference and/or compatibility 
conflicts, turn off the radio in any facility where posted notices 
instruct you to do so. Hospitals, health care facilities or Airports 
may be using equipment that is sensitive to external RF energy. 

Aircraft 
When instructed to do so, turn off the radio when onboard 
on aircraft. Any use of a radio must be in accordance with 
applicable regulations per airline crew instructions. 

Medical Devices – Pacemakers 
The Advanced Medical Technology Association recommends 
that a minimum separation of 6 inches (15 cm) be maintained 
between a handheld wireless radio and a pacemaker. These 
recommendations are consistent with the independent 
research by and recommendations of the U.S. Food and Drug 
Administration. 

People with pacemakers should: 
•  ALWAYS keep the radio more than 6 inches (15 cm) from their 

pacemaker when the radio is turned ON. 

•  Not carry the radio in the breast pocket. 
•  Use the ear opposite the pacemaker to minimize the potential 

for interference. 

•  Turn the radio OFF immediately if there is any reason to 

suspect that interference is taking place. 

Medical Devices – Hearing Aids 
Some digital wireless radios may interfere with some hearing 
aids. In the event of such interference, you may want to consult 
your hearing aid manufacturer to discuss alternatives. 

Medical Devices - Other 
If you use any other personal medical device, consult the 
manufacturer of your device to determine if it is adequately 
shielded from RF energy. Your physician may be able to assist 
you in obtaining this information. 

Safety and General Use While Driving 
Check the laws and regulations regarding the use of radios in 
the area where you drive, and always obey them. If you do use 
the radio while driving, please: 
•  Give full attention to driving and to the road
•  Use hands-free operation, if available
•  Pull off the road and park before making or answering a call if 

driving conditions so require

Do not place a portable radio in the area over an air bag or in the 
air bag deployment area. Air bags inflate with great force. If a 
portable radio is placed in the air bag deployment area and the 
air bag inflates, the radio may be propelled with great force and 
cause serious injury to occupants of the vehicle. 

Potentially Explosive Atmospheres 
Turn off the radio prior to entering any area with a potentially 
explosive atmosphere. Only radio types that are especially 
qualified should be used in such areas as “Intrinsically Safe.” Do 

Owner’s Manual  

Olympia 2-Way radios are intended for recreational (consumer) 
use only and are not intended for business use. Olympia offers an 
alternate product designed specifically for business use - Olympia 
P324 Business radio. See below for contact information. 

For a list of accessories sold, please contact us.

For further information, call Giant International Ltd. at  
1-866-537-0384, e-mail us at support@giantintl.com or visit us  
on the Internet at www.olympiaproducts.com 

Waterproof 
This radio is waterproof to IP-54 standards. It is dust/splashproof 
from any direction. The radio is resistant to water and rain 
splashes only when the battery cover, headset accessory and 
micro-USB ports are sealed. Open the battery compartment door 
or headset port cover only when the radio is dry. Use of a headset 
accessory should be in dry environments only. The micro-USB 
cable and plug is not waterproof. Do not expose the charger 
to rain or snow. Charge the radios only in a dry location. The 
battery door must be tightly closed with the screw to maintain the 
weatherproof seal of the radio. 

Installing NiMH Rechargeable Battery Pack or AA Alkaline 
Batteries
1.  Turn the radio off.  Ensure that the belt clip is not attached to 

the radio.

2.  With the back of the radio facing you, loosen the retaining 

screw on the battery door and open the cover.

3.  Remove the NiMH battery pack from the clear plastic bag (do 

not disassemble or unwrap the battery pack) or remove AA 
batteries from its packaging.

4.  Insert the NiMH battery pack with the diagram facing you or 

insert the three AA alkaline batteries with + and - polarity as 
shown inside the battery compartment.. (The ribbon should be 
underneath the battery pack and should wrap around the right 
side of the pack for easy removal.)

5.  Close the battery cover and tighten the retaining screw on the 

battery door.

Radio Battery Meter
The radio battery icon shows the battery charge level, from full 

 to empty 

. When the radio has one segment left 

, 

 the radio chirps periodically or after releasing 

. (see Low 

Battery Alert section) 

Removing the NiMH Battery Pack or AA Alkaline Batteries 
1.  With the radio off.  Ensure that the belt clip is not attached to 

the radio.

2.  With the back of the radio facing you, lift the battery latch up to 

release the battery cover and remove the cover. 

R300 series 

Warning: This manual contains important safety and operating 
information. 

Please read, understand, and follow the instructions in this 
manual. Failure to do so could result in personal injury, death, and/
or damage to the radio, accesories and/or other property. 

Transmit and Receive Procedure  
The Two-Way radio contains a transmitter and a receiver. To 
control your exposure and ensure compliance with the general 
population/uncontrolled environment exposure limits, always 
adhere to the following procedure: 

•  Transmit no more than 50% of the time. 
•  To receive calls, release the Push-to-Talk (PTT) button. 
•  To transmit (talk), press the PTT button. 

Transmitting 50% of the time, or less, is important because the 
radio generates measurable RF energy exposure only when 
transmitting (in terms of measuring standards compliance).  

Exposure to Radio Frequency Energy  
The Olympia Two-Way radio complies with the following RF energy 
exposure standards and guidelines: 

•  United States Federal Communications Commission, Code of 

Federal Regulations; 47CFR part 2 sub-part J. 

•  American National Standards Institute (ANSI)/Institute of 

Electrical and Electronic Engineer (IEEE) C95. 1-1992. 

•  Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 

Edition.

•  International Commission on Non-Ionizing Radiation Protection 

(ICNIRP) 1998.

•  Ministry of Health (Canada) Safety Code 6. Limits of Human 

Exposure to Radiofrequency Electromagnetic Fields in the 
Frequency Range from 3 KHz to 300 GHz, 1999. 

To ensure optimal radio performance and make sure human 
exposure to radio frequency electromagnetic energy is within the 
guidelines set forth in the above standards, always adhere to the 
following procedures. 

not remove, install or charge batteries in such areas. Sparks in 
a potentially explosive atmosphere can cause an explosion or 
fire resulting in bodily injury or even death. 

Note: The areas with potentially explosive atmospheres 
referred to above include fueling areas such as below decks 
on boats, fuel or chemical transfer or storage facilities, areas 
where the air contains chemicals or particles (such as grain, 
dust or metal powders) and any other area where you would 
normally be advised to turn off your vehicle engine. Areas with 
potentially explosive atmospheres are often—but not always—
posted. 

Blasting Caps and Areas 
To avoid possible interference with blasting operations, turn 
off the radio when you are near electrical blasting caps, in a 
blasting area, or in areas posted “Turn off Two-Way radios.” 
Obey all signs and instructions. 

Operational Cautions 
Antennas 
Do not use any portable radio that has a damaged antenna. If 
a damaged antenna comes into contact with your skin, a minor 
burn can result. 

Batteries 
All batteries can cause property damage and/or bodily injury 
such as burns if a conductive material—like jewelry, keys or 
beaded chains—touch exposed terminals. The conductive 
material may complete an electrical circuit (short circuit) and 
become quite hot. Exercise care in handling any charged 
battery, particularly when placing it inside a pocket, purse or 
other container with metal objects. 

Battery Charger Safety Instructions: 
1.  Do not expose the micro-USB cable or plug to rain or snow. 
2.  Never alter the micro-USB cable or plug provided with the 

unit. If the plug will not fit the outlet, have the proper outlet 
installed by a qualified electrician. An improper condition 
can result in a risk of electric shock. 

3.  To reduce the risk of electric shock, unplug the micro-USB 

charging cable from the power outlet before attempting any 
maintenance or cleaning. 

4.  Use of an attachment not recommended or sold by Olympia 

may result in a risk of fire, electric shock or personal injury. 

5.  Make sure the micro-USB cable is placed where it will 

not be stepped on, tripped over or subjected to damage or 
stress. 

The Olympia radio operates on General Mobile Radio Service 
(GMRS) frequencies and is subject to the Rules and Regulations 
of the Federal Communications Commission (FCC). The FCC 
requires that all operators using GMRS frequencies obtain a 
radio license before operating their equipment. To obtain the 
FCC forms, please visit the FCC’s Web site at wireless.fcc.gov/
uls/index.htm?job=home to source form 605 and 159, which 
includes all the instructions you will need. 

If you wish to have the document faxed or mailed, or if you have 
questions, please use the following contact information: 

Changes or modifications not expressly approved by Giant 
Intl. Ltd. may void the user’s authority granted by the FCC 
to operate this radio and should not be made. To comply 
with FCC requirements, transmitter adjustments should be 
made only by or under the supervision of a person certified 
as technically qualified to perform transmitter maintenance 
and repairs in the private land mobile and fixed services as 
certified by an organization representative of the user of those 
services. Replacement of any transmitter component (crystal, 
semiconductor, etc.) not authorized by the FCC equipment 
authorization for this radio could violate FCC rules. 

You can find the label with the FCC ID on the back of the radio.

Note: Use of this radio outside the country where it was 
intended to be distributed is subject to government regulations 
and may be prohibited. 

3.  Remove the NiMH battery pack or remove the AA batteries by 

gently pulling the ribbon attached to the radio. 

4.  Reposition the battery cover and press down to secure. 

Notes: 
•   AA Alkaline batteries are optional accessories and are sold 

separately. 

•   Exercise care when removing NiMH or AA batteries. Do 

not use sharp or conductive tools to remove either of these 
batteries. 

•   Remove the batteries before storing the radio for extended 

periods of time. Batteries corrode over time and may cause 
permanent damage to the radio. 

•   The battery door must be tightly closed with the screw to 

maintain the water resistant seal of the radio.

Using the micro-USB Charging Connector 
The micro-USB charging connector is a handy port that allows 
you to conveniently charge the NiMH battery pack. If using a 
computer, the computer must be turned on. 
1.  Plug the micro-USB cable or charger into a power source as is 

appropriate for your accessory. 

2.  Plug the cable into the micro-USB port on the bottom of the 

radio. 

3.  An empty battery will be fully charged in 14 hours. 
4.  The battery icon will scroll as the battery is being charged. The 

scrolling icon will stop when the battery is fully charged.

Notes 
•   When moving between hot and cold temperatures, do not 

charge the NiMH battery pack until the battery temperature 
acclimates (usually about 20 minutes). 

•   For optimal battery life, remove the radio from the charger 

within 16 hours. Do not store the radio while connected to the 
charger. 

•   If the radio is kept on while charging, the charging time will be 

extended. 

•   Even though the charger is connected, you may not be able  

to transmit a message if the battery is completely empty  

. Allow time for the battery to charge to 1 bar 

 

before attempting to transmit a message. 

Low Battery Alert
In addition to the battery meter which visually shows the current 
battery charge level, the Low Battery Alert feature produces an 
audible chirp when the batteries are low.

Attaching and Removing the Belt Clip
1.  Align the belt clip post with the groove on the back of the radio 

and slide it into place.

2.  Gently push until the clip clicks in place.

To remove:
1.  Push down on the release tab at the top of the belt clip to 

release the catch.

2.  Pull the belt clip away from the back of the radio.

Turning the Radio On and Off
In the ON position, the radio chirps and briefly shows all feature 
icons available on the radio. The display screen then shows the 
current channel, code and all features that are enabled.

1.  To turn on, press and hold 

 until a channel number appears 

and the radio beeps. 

2.  To turn off, press and hold 

 until the display goes blank. 

Setting the Volume
The R300 has 16 volume levels controlled by the 

 or 

 keys.

1.  Press 

 to increase volume.

2.  Press 

 to decrease volume.

3.  Hold 

 or 

 to rapidly increase volume.

Do not hold the radio close to your ear. If the volume is set to an 
uncomfortable level, it could hurt your ear.

To communicate, all radios in your group must be set to the same 
channel and code setting.

1.  To talk, press and hold 

.  

2.  When you are finished talking, release 

.  

For maximum clarity, hold the radio two to three inches away 
from your mouth and speak directly into the microphone. Do not 
cover the microphone while talking.

Power Boost
To boost the radio’s power up to high power, press the 

 button 

when talking. If you know your party is close by, you can conserve 
the battery’s energy by pushing the 

 button to use less power.

Note: If you are on an FRS only channel (see Channels and 
Frequencies table located at the back of the manual.) the radio 
will only use low power when either portion of the 

 is pressed.

Monitor Button
Use the Monitor function to check if a channel is currently in use 
by others. For maximum range performance, the Monitor function 
will also help you to hear signals that are weak.

To latch the Monitor function on, press and hold 

 for three 

seconds. When an empty channel is located, you will hear 
continuous static and noise on that channel.

To turn the Monitor function off, tap 

 a second time or press 

.

 Timeout Timer  

To prevent accidental transmissions and save battery life, the 
radio emits a continuous warning tone and stops transmitting if 
you hold 

 for more than 60 seconds. 

There are 10 options you may set to your preferences. Each 
press of the MENU key advances you to the next option setting. 
Press the 

 or 

 keys to change the setting. The menu will 

automatically close 5 seconds after the last press of any button. 
After the last menu item, the radio exits MENU mode and returns 
to operation of the radio. A press of the 

 button while setting 

any menu option will immediately save all your settings and return 
to operation of the radio.

All MENU settings will revert to the factory default values  
if the battery is fully discharged or removed for more than  
5 minutes.

1. Channel (1-50)
2. Codes
3. Call Tone (1-10 or OFF)
4. iVOX (ON/OFF)
5. VOX
6. Extended Battery Save

Selecting the Channel 
The radio has 50 channels that are compatible with all brands 
of 2-Way radios. The channel is the frequency the radio uses to 
transmit. (See the Channels and Frequencies table located at the 
back of the manual.) Channels are shared by other radio users 
and channel selection will vary based on your location. Select 
a channel that is not being used from the 50 available simplex 
channels. Channels 8-14 and channels 34-37 are low power  
(FRS 0.5 watt). All other channels are GMRS.

When the radio is on a FRS 0.5 watt channel, 

 displays. 

When the radio is on a GMRS 1.5 watt channel, 

 displays.

1.  Briefly press and release 

. The channel number flashes. 

2.  Press 

 or 

 to select a channel. 

3.  Press 

 to confirm or 

 to continue set up. 

Selecting the Tone/Code
This radio has 121 code settings. When a channel is in use by 2 or 
more groups, this feature blocks the reception of signals that do 
not carry the matching tone or code. There are 121 privacy codes. 
0 is the off position, no analog or digital codes are enabled and all 
users of that channel will be heard. Codes 1 – 38 are the standard 
analog (CTCSS) codes that appear on other FRS/GMRS radios. 
Codes 39 – 121 are additional digital (CDCSS) codes added for 
superior interference protection. 0 is the off position.

See the Tone/Code Setting Frequency table located at the back of 
the manual for details on tone frequencies and code values.

To set the code for a channel: 
1. Press 

 twice until the code starts to flash. 

2.  Press 

 or 

 to select the code. 

3.  Press 

 to save the code setting or 

 to continue set up. 

You can set a different code for each channel using this procedure. 
An extended press of 

 or 

 allows you to scroll through the 

Interference Codes rapidly so you can quickly reach the code you 
want. 

Note: You must set the code to 0 on a radio that uses codes to 
communicate with radios that do not have Codes. Select 0 for “no 
tone, no code” and OFF will flash on the radio’s display. 

Setting and Transmitting Call Tones 
The radio can transmit different call tones to other radios in your 
group so you can alert them that you want to talk. You have 10 call 
tones from which to choose. 

7. Vibrate
8. Keypad Tones (ON/OFF)
9. Roger Beep (ON/OFF)
10. Auto Power Off (30/60/90 minutes     
      or OFF)